products categories
- Battery Production Equipment Line
- Battery Lab Pilot Equipment Line
- Lithium Battery Pack Assembly Line
- Sodium Ion Battery Production Line
- Solid State Battery Assembly Line
- Supercapacitor Assembly Line
- Lithium Ion Battery Recycling Plant
- Dry Electrode Preparation Solution
- Li ion Battery Materials
- Cathode Active Materials
- Anode Active Materials
- Customized Battery Electrode
- Coin Cell Parts
- Lithium Chip
- Cylindrical Cell Parts
- Battery Current Collectors
- Battery Conductive Materials
- Electrolyte
- Metal Mesh
- Battery Binder
- Separator and Tape
- Aluminum Laminate Film
- Nickel Strip
- Battery Tabs
- Graphene Materials
- Titanium Fiber Felt
- Battery
- Battery Pack Machine & Compoments
- Lithium Battery Machine
- Battery Tester & Analyzer
- Battery Safety Tester
- Battery Material Tester
- Rolling Press Machine
- Spot Welding Machine
- Vacuum Mixer Machine
- Crimping/Disassembling Machine
- Vacuum Sealing Machine
- Electrolyte Filling
- Stacking/Winding Machine
- Electrode Cutter/Slitter
- Pouch Forming Machine
- NMP Solvent Treatment System
- Lithium Battery Production Plant
- Vacuum Glove Box
- Furnaces
- Coaters
- Hydraulic Press
- Ball Mill
- Planetary Centrifugal Mixer
- Laboratory Machine
- Metal Foam
contact us
- If you have questions, please contact us, all questions will be answered
- WhatsApp : +86 13003860308
- Email : David@tmaxcn.com
- Email : Davidtmaxcn@gmail.com
- Add : No. 39, Xinchang Road, Xinyang, Haicang Dist., Xiamen, Fujian, China (Mainland)
Single-Zone 1200°C Split Tube Furnace
Model Number:
TMAX-1200CfurnaceDimension(L*W*H):
Size can be customizedCompliance:
CE CertifiedWarranty:
Two years limited warranty with lifetime technical supportPayment:
L/C D/A D/P T/T Western UnionDelivery Time:
5 days
- WhatsApp : +86 13003860308
- Email : David@tmaxcn.com
- Email : Davidtmaxcn@gmail.com
- Wechat : 18659217588
Previous:
Single-Zone 1700°C Tube Furnace with Alumina Tube and Sealing FlangesNext:
Single-Zone 1400°C Tube Furnace with Alumina Tube and Sealing Flanges
Single-Zone 1200°C Tube furnaces
TMAX-1200Cfurnace
split tube furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded
in Mitsubishi (Japan) high quality grade 1500 alumina
fiber insulation. A double walled steel internal housing helps minimize heat
loss to exterior urface.
Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.
All our furnaces are CE compliant.
Features
1 Compact, portable and lightweight design.
2 Split furnace chamber for fast and easy tube access.
3 Standard package includes set of stainless steel vacuum sealing flanges with valves and pressure meter.4 Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
5 Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
6 Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
7 Built-in computer interface.
8 Long life type K thermocouple.
Safety
1 Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
2 Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
Warning!
NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide
and Methane.
General specifications
Electrical
requirements |
110-240VAC,
50/60 Hz, single phase |
Tube
material |
Quartz |
Maximum
working temperature |
1200°C |
Maximum
constant working temperature |
1100°C |
Constant
working temperature under vacuum |
1000°C |
Minimum
working temperature |
Ambient |
Rated
vacuum pressure |
0.001
Pa / 0.0075 millitorr / 0.00001 mbar |
Rated
positive pressure |
0.02
MPa / 150 torr / 3 psi |
Heating
element type |
Kanthal (Sweden) resistance coil wire |
Thermocouple
type |
K |
Refractory
lining |
Mitsubishi (Japan)
high quality 1500 grade fiber alumina |
Temperature
controller |
Shimaden (Japan) fp93 (made in Japan) with 4
programs and |
Maximum
heating & cooling rate |
<
30°C / min |
Heating
zone length |
16
inches |
Constant
temperature zone length |
10
inches |
Temperature
controller precision |
+/-
1°C |
Vacuum
sealing flange kit |
Stainless
steel vacuum sealing flanges with one vacuum gauge, |
Gas
inlet/outlet |
1/4"
hose barb with 1/4" BSPT (British Standard Pipe Thread) |
CE
compliance |
Yes |
Size comparison
Tube size (OD x length) |
60mm x 1m |
80mm x 1m |
100mm x 1m |
120mm x 1m |
150mm x 1m |
200mm x 1m |
250mm x 1m |
Maximum output |
2.5 kW |
3.5 kW |
3.5 kW |
4 kW |
5 kW |
6 kW |
8 kW |
Furnace dimensions (LxWxH) |
24x15x20" |
24x17x23" |
24x17x23" |
24x17x23" |
24x18x24" |
26x21x28" |
26x21x28" |
Shipping dimensions (LxWxH) |
46x21x36" |
46x21x36" |
46x21x36" |
46x21x36" |
46x22x37" |
50x28x40" |
50x28x40" |
Shipping weight (Lb) |
260 |
300 |
340 |
400 |
450 |
500 |
650 |
Standard Package
Part description |
Quantity |
Part image |
split
tube furnace |
1
pc |
|
Quartz
tube 1000mm length |
1-2
pcs |
|
Stainless
steel vacuum sealing flanges w/ pressure gauge |
1
set |
|
Analog
flow meter |
1 pc |
|
Stainless
steel hook |
1
pc |
|
Alumina
thermal block (for 120mm OD and down) |
2
pairs |
|
Thermal
gloves |
1
pair |
|
Spare
fuse |
2 pcs |
|
USB/RS485 computer
interface kit |
1
set |
|
L6-30P
250 volt twist-lock plug |
Pre-installed |
|
Furnace
and Shimaden controller manual |
2 pcs |
|