products
Coin Cell Crimper

Lab Electric Coin Cell Crimper for CR20XX Coin Cells

  • Model Number:

    TMAX-160S
  • Dimension(L*W*H):

    250 x 150 x 450mm
  • Net Weight:

    25 kg (55 lbs)
  • Warranty:

    Two years limited warranty with lifetime technical support
  • Payment:

    L/C D/A D/P T/T Western Union
  • Delivery Time:

    7 day
  • contact now
Product Details

Lab Electric Coin Cell Crimper for CR20XX Coin Cells


This is our product video link

https://www.youtube.com/watch?v=aNygovqbDm4&feature=youtu.be


TMAX-160S is a electric coin cell crimper for the CR20XX series coin cells such as CR2016, CR2025, and CR2032. TMAX-160S is designed to be operated at both inside and outside of a glove box. This coin cell crimper can be used under Argon gas for half-cell testing.  


SPECIFICATIONS:

Power

110 - 240V AC 50/60Hz for universal use
24V DC motor with reducing gear, 20W 

Die Set & Compatibility

Assembling dies for crimping CR2032, CR2025, & CR2016 coin cells (Optional CR2325, CR2450 die sets are available upon request).

Pressure

1. The pressure applied to seal the cell case is pre-set to a constant pressure at about 800 kg before shipping.
2. Pressure adjustment knob at the top can be used to adjust the pressure applied to the negative cap of the cell  to prevent case deformation. 

Structure

Heavy Duty Steel Platform

Protection Shield

Protection shield / enclosure (plexiglass) with safety interlock is installed

Product Dimensions

250mm(L) x 150mm(W) x 450mm(H) 

Compliance

CE 

              

Warranty

Two years limited warranty with lifetime support

Maintenance Notes & Warnings

 

1. Electrolytes are highly corrosive materials.The die set must be cleaned with alcohol after each use to avoid corrosion 
2. The PTFE die (found at the top die) ejects the cell casing after crimping via spring loaded pressure. Do NOT over tighten the pressure adjustment knob to avoid damaging this PTFE die.
3.To set the proper pressure on the die, loosen the knob all the way until the spring compression is no longer stressed. Then start tightening the knob and stop turning it once the spring compression is felt.
4.This will prevent the PTFE die from becoming deformed by being subjected to excessive pressure.

Net Weight

32 kg

Shipping Weight

46 kg 

Coin cell crimper

Electric Crimping Machine

Electric Crimping Machine

Electric Crimping Machine

 

 

 


1.  We supply machines with battery technology support.

2.  We supply full set of lithium battery equipment for lab research, pilot scale research and production line.


coin cell sealer


1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.