1600C Lab Air Atmosphere Microwave Expansion Furnace for Sintering and Heat Treatment

I. Product Overview

The HY-MF3016 microwave high-temperature muffle furnace is suitable for microwave sintering, microwave ashing, microwave expansion, microwave heat treatment, microwave baking, microwave calcination, and microwave synthesis in process experimental research under air conditions.

II. Product Images (Below are the physical pictures of the same model equipment provided by a certain university, for reference only)

III. Technical Specifications

1. Power Supply: 220 ± 10V, 50Hz

2. Rated Power: 5KW

3. Microwave Output Power: 0.01 - 2.8KW, adjustable continuously

4. Microwave Frequency: 2.45GHz

5. Maximum Working Temperature: 1600℃

6. Continuous Working Temperature: ≤ 1550℃

7. Heating Space: 150 × 110 × 70mm (Length × Width × Height)

8. Temperature Measurement Method: Infrared Thermometer

9. Temperature Measurement Range: 300 - 1800℃

10. Temperature Control Precision: Reading ± 0.5%

11. Control System: Mitsubishi PLC control, Kunlun Tongzhe 7-inch touch screen operation, including manual, constant temperature, and automatic three temperature control modes, 40 sets of configurable process parameters can be set, data storage, export experimental data; real-time curve display, screen saver display

12. The device is equipped with a one-click oven heating function

13. Microwave Leakage: Includes microwave shielding device, handheld microwave leak detector, microwave leakage < 1mW/cm2

14. Safety Alarm: Equipment over-temperature, magnetron tube overheating, microwave system failure

15. Main Body: Approximately 850 × 650 × 750 mm (Length × Width × Height)

IV. Key Configurations

1. 1 set of 304 stainless steel furnace body, 1 set of carbon steel powder-coated outer cover

2. 2 sets of industrial-grade microwave systems, including Panasonic magnetron and Meggerth switch power supply

3. 1 set of 1800℃ high-purity curing polycrystalline fiber insulation structure, 1 piece of microwave-specific support plate

4. 4 quartz crucibles, 4 corundum crucibles

5. 1 platinum-rhodium thermocouple

6. 1 Mitsubishi PLC, 1 7-inch Kunlun touch screen

7. Including 1 handheld microwave leak detector, 1 set of microwave fully shielded snap rings

8. Including 1 set of operation gloves and crucible tongs

9. 1 circulating water cooler

V. Quality Warranty Period

The equipment is warranted for 1 year (except for consumables), starting from the day of installation, commissioning and user acceptance. During the warranty period, spare parts and services will be provided free of charge. After the warranty period, we offer lifetime maintenance services.