300L Planetary Vacuum Mixing Equipment for Battery Slurry & High-Viscosity Substances

300L Planetary Vacuum Mixing Equipment for Battery Slurry & High-Viscosity Substances Ⅰ. Equipment Features: Application Scope Once slurry preparation in the mixer is complete, the tank is shifted to the lifting platform, fitted with a mixing head, and converted into a slurry transfer tank. It supports slurry transfer from the mixing area to storage and coating sections, delivering slurry to the main tank or coater head via quick-connect adapters.   Ⅱ. Main Technical Parameters: Container Parameters l Design Total Volume: 395 L l Effective Volume: 130–300 L l Inner Diameter: 836 mm l Inner Depth: 720 mm l Contact Material: SS304 l Jacket Type: Single layer on wall and bottom for heating/cooling l Jacket Connection: G1″ quick connect, rated ≤ 0.4 MPa l Jacket Circulation: Supplied by customer; inlet ≤ 8 °C, flow > 80 L/min l Discharge: One G1 1/2″ three piece ball valve at bottom with 2″ ISO quick connect l Ambient Temperature: –10 °C to +120 °C l Mobility: Caster mounted l Compatible with 300 L mixer bucket   Mixing Components l Frequency: 50 Hz l Mixer Power: 3.0 kW (1 unit) l Mixing Speed: 30 rpm (fixed) l Impeller Diameter: 776 mm l Impeller Style: Inclined paddle screw l Impeller Material: SS304 l Tip Speed: 1.2 m/s l Impellers: 1 l Shafts: 1 l Clearance to Wall: 30 mm l Clearance to Bottom: 10 mm l Principle: Unique inclined paddle design prevents sedimentation   Top Cover Components l Material: SS304 l Feeding Port: ISO quick connect 1″ (1 unit) l Sight Glasses: DN100 tempered glass (2 units) l Vacuum Port: G1″ quick connect (vacuum/vent) l Digital Vacuum Gauge Port: M14×1.5 internal thread (1 unit)   l Control System l Cabinet: houses inverter and lowvoltage devices l Manual Panel: buttons, knobs, instruments l Power: AC 3×380 V ±5%, 50 Hz l Control Mode: electric l Operation: cabinet panel buttons + knobs l Emergency Stop: 1 l Start Button: 1 l Stop Button: 1 l Work light Switch: 1   Safety Interlock Emergency Stop immediately halts all operations; no further action possible   Additional Notes l Seals: domestic; static by O ring, dynamic by mechanical/skeleton seal l Grease: domestic l Valves: domestic l Vacuum Requirement: customer provides ≥ 15 L/s (2×15) vacuum system l Vacuum Retention: –0.098 MPa, holds > –0.085 MPa for 24 h without leakage l Main Power: > 3 kW l Weight: ~275 kg l Dimensions: L11420 mm × W1088 mm × H1845 mm l Color: Ivory white l Floor Load Capacity: 600 kg/m²   Ⅲ. List of Spare Wear Parts: No. Name Specification Material Qty Remarks 1 Top lid sealing O ring ΦD×ΦN Silicone 1 Matched to model, per supplier 2 Sight glass sealing ring — Silicone 2 Matched to model, per supplier 3 Feed port gasket — Silicone 1 Matched to model, per supplier 4 Sight glass pane Tempered glass Glass 2 Matched to model, per supplier   Ⅳ. Supporting Installation Requirements: No. Item Standard Requirement 5 Workshop Height > 3.0 m; clearance for lift operation and maintenance; clean & level floor 6 Door Size Height > 2.0 m; Width > 1.5 m; to allow equipment entry/exit 7 Cooling Water Must meet heat load requirements; forced system preferred; hot water in winter 8 Heating Maintain > 20 °C in winter to prevent hydraulic oil from gelling; ensure lubrication 9 Installation Space As per layout drawing 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic operation 11 Others No corrosive/explosive gases or liquids        

300L Pneumatic Lifter for Planetary Vacuum Mixing Machine

300L Pneumatic Lifter for Planetary Vacuum Mixing Machine Ⅰ. Equipment Features: Application Scope Lifting equipment for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System Air Supply Pressure: 0.5–0.6 MPa (dry compressed air) Air Flow Rate: 15 L/min Lift Control Panel: Manual directional valve with self-locking mechanism Control Type: Manual Maximum Lifting Capacity: Up to 470 kg Gross Machine Weight: Approximately 470 kg Overall Dimensions: 1800 mm (L) × 1400 mm (W) × 1775 mm (H) Raised Height: 2675 mm Exterior Finish: Ivory white Floor Loading Requirement: 400 kg/m²   Ⅲ. Key Component Brands: No. Name Specification Material Quantity Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac     Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 3.5 m; Sufficient height clearance for machine lifting and maintenance; clean and level 2 Door Dimensions Height > 2.0 m; Width > 1.5 m; Ensure access for equipment transport 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease in the cylinder from gelling and to ensure smooth lifting and proper lubrication 4 Installation Space Layout should follow the general site plan 5 Others No corrosive gases or liquids, no explosive gases