10T-100T CNC 4 Post Servo Hydraulic Press Machine

10T-100T CNC 4 Post Servo Hydraulic Press Machine   Introduction The function of the equipment: press-fitting The power source of the equipment: It is powered by a fluid pressure of 25MPA, with a total power of 5.5KW Equipment structure: Four-column structure.   Working conditions 1. Working environment: Ambient temperature -10 to 45℃, relative humidity 40 to 80% 2 Power supply voltage: AC380V (±10%), frequency 50HZ (±1HZ), three-phase five-wire 3 The maximum working pressure of the liquid is 21MPA. When the room temperature is 35℃, the continuous working oil temperature does not exceed the set 65℃ 4 Use high-quality #46 hydraulic oil   Main technical parameter (30T press parameter) No Parameter Unit Vaule Note 1 Output range of the oil cylinder Tf or KN 5-30 or 50-300 2 The maximum working pressure of the oil pump MPA 21 3 The maximum working height of the sliding speed and the lower working face MM 400 4 Cylinder stroke MM 300 5 The minimum working height of the sliding speed and the lower working face MM 100 6 Effective area of the lower workbench (left and right * front and back) MM 500*400 T-slot clamping 7 Effective area of the upper working surface (left and right * front and back) MM 500*400 T-slot clamping 8 Throat depth MM 200 9 The height of the lower working face from the ground MM 900 10 The descent speed of the slider MM/S 150 11 The feed speed of the slider MM/S 1—20, adjustable 12 The rebound speed of the slider MM/S 150 13 Motor power KW 5.5KW 14 The total weight of the equipment is KG 2000 15 Repeatability accuracy of equipment pressure ±1% 16 Minimum display unit of pressure KN 1 17 Minimum display unit of displacement MM 0．01 18 The display accuracy of the downward press is MM ±0.01 19 Pressing down shows the repeat positioning accuracy as MM ±0.03 20 The sampling speed of the system for the force sensor Times/s 2000 21 Safety light curtain protection height MM 300 22 Holding pressure time MIN 0-5s 23 Parallel accuracy of the upper and lower working surfaces MM Within 0.15  

5T-20T Automatic Upper Oil Lower Electric Hydraulic Servo Press Machine

5T-20T Automatic Upper Oil Lower Electric Hydraulic Servo Press Machine   Introduction The upper oil lower electric powder forming machine adopts a 3R mold changing and positioning system. The servo motor drives the lead screw to drive the upper punch, mother mold and lower punch to move up and down with high precision. The powder is injected into the female mold through the hopper, material pipe and material shoe to achieve fully automatic functions such as powder pressing and forming, demolding, material picking and tray loading. Equipment forming speed: 1-30 revolutions per minute; Forming accuracy: ≤0.02mm; Repeatability accuracy: ≤0.005mm; Drive mode: Pure electric, oil on top and electricity at the bottom. Formwork structure: top one bottom one, top one bottom two, top one bottom three, top two bottom two, top two bottom three, top two bottom four; All parameters can be customized as needed. Features 1) The powder is formed by the servo motor driving the lead screw to rotate the upper punch, the mother mold and the lower punch to move up and down. The product has uniform density, uniform size and stable weight. 2) It features a reasonable structure, stable performance, firm operation, reliable durability, high working accuracy and high efficiency. 3) High-definition LCD screen, user-friendly human-machine interface, precise control, intuitive and simple operation, and convenient maintenance. 4) Safety: The moving parts adopt a fully enclosed design to eliminate operational safety hazards and ensure no blind spots in safe production. 5) Environmental friendliness: The entire machine adopts a fully dust-proof design, is easy to clean, has no oil or powder leakage, and generates low noise. 6) The guide sleeve parts of the equipment are automatically oiled to ensure no grinding occurs, and the oil injection pump automatically alarms when it is short of oil. Application This product is widely used in the following industries: 1. Hard alloys: tungsten carbide, tungsten oxide, etc. 2. Ceramic powders: alumina, zirconia, silicon carbide, silicon oxide, etc. 3. Magnetic materials: manganese-zinc ferrite, nickel-zinc ferrite, neodymium iron boron, aluminum-iron-boron, iron-silicon-aluminum, etc. The products are applied in industries such as inductor cores, integrated inductors, semiconductors, communication base stations, various power supplies, consumer electronics, medical care, industrial electronics, construction machinery, electric vehicles, and new energy (photovoltaic, energy storage, wind power). Technical parameters Model FM-5T FM-10T FM-15T FM-15T FM-20T FM-20T Maximum pressure (T) 5 10 15 15 20 20 Maximum demolding force (T) Concave mold 5 5 8 8 10 8 Second stroke / 4 / 7 6 / Maximum filling depth (mm) Concave mold 30 50 50 50 60 50 Excess material/shortage (mm) 0-5 0-5 0-5 0-5 0-5 0-5 Upward stroke (mm) 150 150 150 150 150 150 Upward stroke adjustment (mm) 30 30 30 30 30 30 Die surface adjustment allowance (mm) 5 10 10 10 10 10 Maximum forming speed (S.P.M) 8-35 8-35 8-35 8-35 8-35 8-35 Motor power (KW) Upstroke servo motor 5.5 11 15 15 15+Reducer 15+Reducer Downstroke servo motor 4.4 2.9 7.5 7.5 4.4+Reducer 7.5 Lower two-stroke servo motor / 2.9*2 / 5.5*2 4.4*2 / Feeding servo motor 0.4 0.4 0.4 0.4 0.4 0.4 Machine weight (T) 1.7 2.2 2.5 3.2 6.5 6.5 Machine dimensions (mm) Length 1150 1150 1150 1150 1250 1250 Width 1150 1150 1150 1150 1550 1550 Height 2350 2420 2850 3300 3450 3450