5L High Viscosity Material Planetary Vacuum Centrifugal Mixer

5L High Viscosity Material Planetary Vacuum Centrifugal Mixer

A. Summarize

B. Working principle of planetary stirring and defoaming

Planetary stirring and defoaming is a process in which two or more materials are put into a cup, and the forced convection generated by the revolution and rotation of the cup makes the materials mix, and the particles of the mixed materials are homogeneous, while the gas in the mixed materials is vacuumed away.

Below are two high viscosity materials mixed in our mixer, material profiles at different times.

   Start     In 25 seconds     In 110 seconds   In 410 seconds

C. Theory and characteristic advantage of product stirring defoaming

a. The design of our products is first based on a complete set of fluid mechanics theory, and the construction of revolution and rotation fluid mechanics models. The optimal stirring defoaming effect is calculated to achieve the optimal design size.

b. Different materials set different parameters for easy operation and management, engineers through hundreds of glue and adhesive mixed materials thousands of tests, can provide you with the best stir defoaming effect.

c. High efficiency, stirring and defoaming is completed in one operation, using only one-sixth of the previous manual mixing time,

d. Good mixing uniformity, defoaming to remove micro and nano bubbles, to achieve the working effect of imported equipment. Eliminate manual glue mixing due to the different technical level of the glue mixing master, and affect the glue mixing effect.

D. The characteristics of stirring defoaming machine are introduced

a. Vacuum stirring defoam machine: high vacuum, long life (5 years on time oil change maintenance machine vacuum degree will not be less than 5%, the vacuum degree is maintained below -95Kpa, the more negative vacuum degree is higher), easy maintenance: the overall material processing of the rotor arm is strong interchangeability, customers can easily change their own parts, you can also send back to our company to change parts. After replacing the parts, the effect is like a new machine.

b. Spindle: The use of Swiss S136 mirror die steel, after multiple heat treatment, the overall hardness of HRC62 degrees. Shaft whole grinding, full runout not more than 1 wire. After mirror grinding, the sealing surface achieves the surface roughness of 0.02um mirror effect, the friction coefficient is very low, the wear of the sealing ring is very small, and the high sealing performance of ultra-long life is achieved. This is one of the magic weapons for many customers to maintain negative pressure above -98Kpa after several years of use.

c. Sealing ring: The use of Germany Bayer company ultra-wear-resistant sealing ring, wear resistance can reach 40M/S line speed, the equipment at 2000 RPM line speed of 4M/S. The pressure can withstand 20KG/c㎡. This is the second magic weapon for many customers to maintain negative pressure above -98Kpa after several years of use.

d. Vacuum pump: The use of international advanced technology improved forced oil circulation lubrication pump, good lubrication, small wear, long life. This is the third magic weapon for many customers to maintain negative pressure above -98Kpa after several years of use.

e. Gear: Adopts the helical bevel gear type structure of the car, stable operation, low noise, long life.

f. Swivel arm: The use of integral swivel arm, all imported from the United States of aviation magnesium aluminum 7075 integral processing, to ensure the accuracy and later stability of the product, the center error is not more than ±0.02. High interchangeability, the same type of machine arm into arbitrary interchangeability, easy maintenance.

E. Configuration list of the ITT-5000S

Standard preparation: 5000ML cone bottom cup

Optional configuration: 4000ML to 1500ML transition sleeve

1500ML cone bottom mixing cup

900ML to 1500ML transition sleeve

900ML mixing cup