Vacuum Thermal Evaporating Carbon Coating Coater for Materials Science

Vacuum Thermal Evaporating Carbon Coating Coater for Materials Science   Introduction Thermal Evaporation Carbon Coater (SD800C Model) is ideal and designed for lab SEM sample preparation. SD800C Model carbon coater applies a thin conductive carbon film on a sample surface. Applying this coating to a non-conductive sample is an effective preparation technique for diminishing charge-up electron artifacts for analysis in a SEM. Working vacuum pressure can be achieved quickly when using proper vacuum pump within 5 minutes. It is user friendly and easy to operate.      Vacuum pump is included. Parameter  Vacuum pump set (Oil required) rotary vacuum pump Rotary pumping speed 50 Hz : 8 m³/h (2.2 L/s)/ 60 Hz : 9.6m³/h 2.6 L/s) Vacuum limit 2Pa Max evaporation current 100A Working pressure 6Pa -4 Pa Vacuuming tme < 5 Min( 2Pa) Vacuum measure Measuring range from atmosphere to 2*10-2mbar Chamber size Φ150*120mm (height) scratch resistant quartz glass  Evaporation target source Target material :carbon rope/target source:carbon rope Operation method Instruction Manua Weight/size 45kg/340mm length x 390mm wide x 300mm high Power supply AC 110V 60Hz or AC 220V 50Hz Power consumption <2000W Warranty One year limited warranty with lifetime product support  

Materials Science Vacuum Magnetron Ion Sputter Coating Coater

Materials Science Vacuum Magnetron Ion Sputter Coating Coater Introduction Materials Science Magnetron Ion Sputtering Coater(SD900M Model) is ideal and designed for lab SEM sample preparation. It is widely used to coat non-conductive or heat-sensitive SEM samples with Au for better imaging. It is also excellent for surface treatment and avoids damage to the substrate sample. Coating Result Sample Picture under SEM (by SD-900M Model) EPTFE (Extended Poly Tetra Fluoro Ethylene) Low vacuum, can be achieved quickly when using proper vacuum pump within 5 minutes. It generates much less heat and avoids plasma damage to the substrate sample. It is user friendly and easy to operate. Vacuum pump is included. Chiller is optional. Parameter Vacuum pump set (Oil required) rotary vacuum pump Rotary pumping speed 50 Hz : 8 m³/h (2.2 L/s)/ 60 Hz : 9.6m³/h (2.6 L/s)  Vacuum limit 2 Pa Max sputtering current 100mA Working pressure 20Pa - 8 Pa Vacuuming time <5 Min(2 Pa) Vacuum measure Measuring range from atmosphere to 2*10-2mbar Chamber size Φ150*120mm (height) scratch resistant quartz glass Magnetron target source Target size φ50*0.1mm(Au)/target source: Au,Ag,Pt Operation method Instruction Manual Weight/size 45kg/360mm length x 300mm wide x 380mm high Power supply AC 110V 60Hz or AC 220V 50Hz Power consumption <1500W Cooling method Water cooling(optional) Warranty One year limited warranty with lifetime product support