50T Electric Rubber Flat Vulcanizing Forming Equipment System

50T Electric Rubber Flat Vulcanizing Forming Equipment System   Introduction 1. The 50-ton pressure forming machine is a relatively advanced pressure forming equipment, used for the vulcanization of various rubber products and the pressing of bakelite and plastic products. The semi-machine has the advantages of compact structure and convenient operation. The electric heating is controlled and displayed by the T-2301 temperature indicator and regulator, featuring high control accuracy, intuitive temperature display and convenient adjustment. The steam heating type adopts metal hoses, which have good sealing performance, long service life and high reliability. 2. The parallel oil supply method of low-pressure high-flow gear pumps and high-pressure low-flow gear pumps is adopted, which not only ensures the rapid heating of the hot plate but also saves electricity. 3. The adoption of an automatic pressure replenishment device ensures the stability of the product quality.   Main Technical Maximum clamping pressure 0.5MN (50 tons) Pressure of the hydraulic system 16MPa Maximum stroke of the plunger 200mm Ascending speed of the plunger 16.5mm/s Heating plate size 400X400mm Number of hot plates 3 (can be increased as required) Distance between the hot plates 100mm (can be enlarged as required Total power of the electric heating 7.2Kw Heating steam pressure 0.6-0.8MPa Temperature of the hot plate 0-300 degrees Net weight Approximately 1200 kg Motor power 3KW, 1440r/min Dimensions L1450XW650XH1620mm  

200T-350T Automatic Solicone Moulding Flat Vulcanizer Press Machine With Double Workstation

200T-350T Automatic Solicone Moulding Flat Vulcanizer Press Machine With Double Workstation   Main parameter Model 200T 250T 300T 350T Clamping force (T) 200 250 300 350 Stroke (mm) 300 300 300 300 Hot plate distance (mm) 300-430 300-430 300-430 300-430 Work platform (mm) Upper: 510*510 Lower: 560*560 Upper: 600*600 Lower: 650*650 Upper: 600*600 Lower: 650*650 Upper: 700*700 Lower: 750*750 Main cylinder diameter (mm) 360 400 450 475 Vacuum chamber travel (mm) 200 200 200 300 Motor power (KW) 9.5*2 9.5*2 9.5*2 11*2 Electrical power (KW) 16*2 18*2 18*2 21*2 Vacuum pump (KW) Double heads(200m2/h) Single  heads(100m2/h) ~ ~ ~ Weight (KG) Double head 9000 11300 13300 16500 Type of mold opening Rise/Fall - Mold entry and exit - front ejection mold opening - (Middle mold opening - ejection device) Dimensions (L*W*H, m) 3.2*2.4*2.6 3.45*2.6*2.75 3.45*2.6*2.75 4.5*2.8*2.95