3L Small Stainless Steel Milk Powder Spray Dryer Machine

Milk Powder Spray Dryer Machine Isolation equipment adopt high speed centrifuge spray drying technology, which is especially suitable for drying the heat sensitive materials, after drying, there's no need for smashing and sorting, so as to reduce the operation procedures and save your time. Parameter Max capacity 1500-3000ml/h Temperature range of Inlet air 30℃-300℃ Temperature range of outlet air 30℃ -140℃ Precision of temperature ± 1℃ Dryer time 1.0-1.5 S Speed of squirmy pump  30-3000ml/h Consume of dryer air 0-330m3 /h, max pressure: 686Pa Consume of spray air 0-4.2m3 /h, spray pressure: 2-5bar Spray system 2 liquid nozzles with standard 0.7mm jet options of 0.5/1.0/1.5/2.0/2.5mm Spray direction downwards co-current Power 4.5KW 108V-240V Dimensions 800*780*1450 ( mm ) L*W*H Application Spray dryer can be used in a wide range where the production of a free-flowing powder sample is required. This technique has processed materials in the following areas successfully: Beverages, Flavours and Colouring, Milk and Egg Products, Plant and Vegetable Extracts, Pharmaceuticals, Heat sensitive Materials, Plastics, Polymers and Resins, Perfumes, Ceramics and Advanced Materials, Soaps and Detergents, Blood, dyestuffs, Food Stuffs, Adhesives, Oxides, Textiles, Bones, Teeth and Tooth Amalgan and many others. Most solutions and supernsions can be spray dried providing that the resulting product has the characteristics of material. It is popular in fields of Food, biology, material, pharmacy, university, and R&D institute, etc. especially for processing temperature-sensitive material , for e.g., powder, because material only touch air for a brief moment so that heat couldn't destroy the component of material. Working Principle Air through filtering and heating, enter the hot air distributor which is at the top of spray dryer, hot air spiraling evenly into the drying chamber. Liquid through the high-speed centrifugal automizer which is at the top of drying chamber, (rotating) centrifugal spray into tiny fog droplet, then contact with the hot air flow, drying finish product in a very short time and whereabouts. Finished product output continuously between the drying tower bottom and cyclone separator, exhaust through dust catcher emptying by induced draft fan. Packing and shipping