25T Silicone Flat Press Moulding Vulcanizing Machine

25T Silicone Flat Press Moulding Vulcanizing Machine   Applications The ZB-910 small flat vulcanizing machine is suitable for pressing various molded products, such as rubber and plastic, and is also applicable to thin sheet products.   Performance characteristics The main unit is of a four-column integral structure, with an upward pressing type. It is divided into three parts: the main unit, the oil tank and the electrical control box. The electric heating is controlled by an automatic temperature controller in three channels, which can be adjusted freely within the range of 20 to 200 degrees. Once the temperature is reached, the circuit can automatically maintain a constant temperature. After the set vulcanization time is achieved, an automatic alarm will sound.   Main Technical Nominal clamping force 0.25MN (i.e., 25 tons) Hot plate size 350*350mm Hot plate spacing 150mm Number of working layers 2 layers Maximum hydraulic pressure 14.5MPa Maximum stroke of the plunger 250mm Heating power 7.2KW Motor power 2.2KW Dimensions 1250x550x1420 mm Net weight Approximately 1T Note This equipment requires 25 liters of 46# hydraulic oil, which should be prepared by the user.