100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines

Ⅰ. Equipment Features:

Application Scope

After the slurry is prepared by the mixer, the bucket is moved to the lifting machine, covered with a mixing head to form a transfer tank. This setup completes slurry transfer from the mixing area to storage or coating area. The slurry is delivered to the main storage tank or coater via quick-connect adapters.

Ⅱ. Main Technical Parameters:

Container Parameters

l Design Total Volume: 140 L

l Effective Volume: 45–100 L

l Inner Diameter: 596 mm

l Inner Depth: 500 mm

l Material (contacting with medium): SS304

l Jacket Type: Single-layer on side and bottom, for heating or cooling

l Jacket Connection: G3/4″ quick coupling, pressure ≤0.4 MPa

l Jacket Circulation: Customer-supplied; inlet ≤8 °C, flow >40 L/min

l Discharge: One G1-1/2″ three-piece ball valve at bottom with 2″ ISO quick coupling

l Ambient Temperature: –10 °C to +120 °C

l Movement: On casters

l Interchangeable with 100 L mixer bucket

Mixing Components

l Frequency: 50 Hz

l Mixing Motor Power: 1.1 kW (1 unit)

l Mixing Speed: 42 rpm (fixed)

l Impeller Diameter: 576 mm

l Impeller Type: Inclined paddle screw strip

l Material: SS304

l Tip Speed: 1.2 m/s

l Number of Impellers: 1

l Number of Shafts: 1

l Clearance (impeller to wall): 10 mm

l Clearance (impeller to bottom): 8 mm

l Principle: Prevents sedimentation with unique impeller design

Top Cover Components

l Material: SS304

l Feed Port: ISO standard quick coupling 1″ ×1

l Sight Glasses: DN80 tempered glass ×2

l Vacuum Port: G3/4″ ×1 set (vacuum/vent)

l Digital Vacuum Gauge Port: M14×1.5 internal thread ×1

l Control System

l Cabinet: Houses inverter and low-voltage components

l Manual Panel: Buttons, knobs, instruments

l Power: AC 3×380 V ±5%, 50 Hz

l Control: Electrical

l Operation: Cabinet panel with buttons/knobs

l Emergency Stop: 1

l Start Button: 1

l Stop Button: 1

l Work Light Switch: 1

Safety Interlock System

Emergency Stop: Immediately halts the system; prevents any further operation

Other Notes

l Seals: Domestic brand; static by O-ring, dynamic by mechanical or skeleton seal

l Grease: Domestic

l Valves: Domestic

l Vacuum Requirement: Customer to supply vacuum system, 8 L/s (2X-8)

l Vacuum Retention: –0.098 MPa; holds >–0.085 MPa for 24 h without leakage

l Main Power: >1 kW

l Weight: Approx. 250 kg

l Dimensions: L830 mm × W830 mm × H1474.5 mm

l Color: Ivory white

l Floor Load: 400 kg/m²

Ⅲ. List of Standard Wear Parts:

Ⅳ. Supporting Conditions: