40T-600T High Precision Electronic Ceramic Powder Servo Press Forming Machine

40T-600T High Precision Electronic Ceramic Powder Servo Press Forming Machine   Introduction The electronic ceramic powder servo forming machine uses a servo motor to drive the lead screw, which in turn drives the upper punch, mother mold and lower punch to perform high-precision up and down movements. The powder is injected into the female mold through the hopper, material pipe and material shoe to achieve fully automatic functions such as powder pressing and forming, demolding, material picking and tray loading. Pressure accuracy ±1%; Displacement accuracy ±0.01mm; Drive mode: Pure electric, oil on top and electricity at the bottom, servo hydraulic Formwork structure: top one bottom one, top one bottom two, top one bottom three, top two bottom two, top two bottom three, top two bottom four;   Product features 1. High-precision control The servo press is equipped with an independent servo system and electrical system, capable of achieving floating pressing, precisely controlling pressure and displacement, and thus enabling high-precision shaping of fine powders. The forming accuracy can reach within 0.02mm, and the repeatability accuracy can reach within 0.005mm. 2. Flexible formwork structure The die frame structure is diverse, including top-one-bottom-one, top-one-bottom-two, top-one-bottom-three, top-two-bottom-two, top-two-bottom-three, top-two-bottom-four, etc. It is suitable for pressing complex products with multiple section differences and multiple blind holes. Quick effect, long service life, high quality and wide adaptability. 3. Multiple driving modes Servo presses can adopt various drive methods, such as upper punch servo hydraulic cylinder drive + lower punch servo hydraulic cylinder drive, or upper punch AC servo motor + direct lead screw drive + lower punch AC servo motor + direct lead screw drive, etc., to ensure precise control of pressure and displacement, to meet different pressing requirements ‌. 4. Intelligent automatic molding, saving time and effort It features fully automatic functions such as powder feeding, molding, demolding, material picking and tray loading Record and analyze the product forming process to achieve flexible line assembly operations 5. High efficiency and stability Efficiency and stability ‌ : The equipment operates stably, is easy to operate, and is equipped with a mechanical limit device to ensure the consistency of the products. Meanwhile, the equipment has a simple structure, is easy to maintain, and is environmentally friendly and energy-saving. ‌   Application The electronic ceramic powder servo forming machine is suitable for the metal magnetic powder core industry, ferrite industry, multi-pole magnet industry: forming of powder products such as alumina, zirconia, silicon carbide, aluminum nitride, silicon nitride, and silicon oxide, such as: electronic ceramics, precision ceramics, ceramic structural components, 5G filters, fasteners, connectors, etc. Technical parameter Dry powder forming machine Item Unit 40T 63T 100T 160T 200T Nominal force KN 400 630 1000 1600 2000 The maximum distance point between the lower plane of the slider and the worktable surface mm It is determined based on the type of cross frame and the loading height Slider operation parameters Maximum suppressing force KN 400 630 1000 1600 2000 Maximum return force KN 180 100 100 160 240 Maximum itinerary mm 350 400 400 400 400 Rapid downward speed mm/s 150 150 160 160 160 Slow downward speed mm/s 15 15 15 10 12 Proportional floating pressing speed mm/s 10-15 10-15 10-15 10-15 8-15 The speed of the rear pressure suppression mm/s 10 10 10 10 12 Return speed mm/s 140 140 150 160 170 Ejection piston operation parameters Maximum top force KN 230 230 340 340 650 Maximum pulling force KN 300 300 480 480 780 Maximum itinerary mm 150 150 150 180 200 Lifting speed mm/s 30 65 30 65 35 Floating downward velocity mm/s 10-15 10-15 10-15 10-15 8-12 Return speed mm/s 45 95 45 95 45 Operating parameters of the lower center cylinder piston Maximum outstretched force KN 60 60 60 60 80 Maximum retraction force KN 35 35 35 35 50 Maximum itinerary mm 100 100 100 120 120 Main motor power KW 12 12 12 15 22 Working frequency times/min 2-8 High consistency of products mm ±0.05-±0.2