25T Silicone Flat Press Moulding Vulcanizing Machine

25T Silicone Flat Press Moulding Vulcanizing Machine   Applications The ZB-910 small flat vulcanizing machine is suitable for pressing various molded products, such as rubber and plastic, and is also applicable to thin sheet products.   Performance characteristics The main unit is of a four-column integral structure, with an upward pressing type. It is divided into three parts: the main unit, the oil tank and the electrical control box. The electric heating is controlled by an automatic temperature controller in three channels, which can be adjusted freely within the range of 20 to 200 degrees. Once the temperature is reached, the circuit can automatically maintain a constant temperature. After the set vulcanization time is achieved, an automatic alarm will sound.   Main Technical Nominal clamping force 0.25MN (i.e., 25 tons) Hot plate size 350*350mm Hot plate spacing 150mm Number of working layers 2 layers Maximum hydraulic pressure 14.5MPa Maximum stroke of the plunger 250mm Heating power 7.2KW Motor power 2.2KW Dimensions 1250x550x1420 mm Net weight Approximately 1T Note This equipment requires 25 liters of 46# hydraulic oil, which should be prepared by the user.  

200T-350T Automatic Solicone Moulding Flat Vulcanizer Press Machine With Double Workstation

200T-350T Automatic Solicone Moulding Flat Vulcanizer Press Machine With Double Workstation   Main parameter Model 200T 250T 300T 350T Clamping force (T) 200 250 300 350 Stroke (mm) 300 300 300 300 Hot plate distance (mm) 300-430 300-430 300-430 300-430 Work platform (mm) Upper: 510*510 Lower: 560*560 Upper: 600*600 Lower: 650*650 Upper: 600*600 Lower: 650*650 Upper: 700*700 Lower: 750*750 Main cylinder diameter (mm) 360 400 450 475 Vacuum chamber travel (mm) 200 200 200 300 Motor power (KW) 9.5*2 9.5*2 9.5*2 11*2 Electrical power (KW) 16*2 18*2 18*2 21*2 Vacuum pump (KW) Double heads(200m2/h) Single  heads(100m2/h) ~ ~ ~ Weight (KG) Double head 9000 11300 13300 16500 Type of mold opening Rise/Fall - Mold entry and exit - front ejection mold opening - (Middle mold opening - ejection device) Dimensions (L*W*H, m) 3.2*2.4*2.6 3.45*2.6*2.75 3.45*2.6*2.75 4.5*2.8*2.95