products categories

contact us

  • If you have questions, please contact us, all questions will be answered
  • WhatsApp : +86 13003860308
  • Email : David@tmaxcn.com
  • Email : Davidtmaxcn@gmail.com
  • Add : No. 39, Xinchang Road, Xinyang, Haicang Dist., Xiamen, Fujian, China (Mainland)
tabs-shaping-machine
  • tabs cutting and shaping machine Lab Double Tabs Cutter and Shaping Machine for Lithium Battery Making

    Lab Double Tabs Cutter and Shaping Machine for Lithium Battery Making Introduction It is mainly suitable for the flat pressing and shaping after cutting the tabs of laminated cells, fixed-length cutting and trimming of the electrode tabs of the batteries, and the double cutters are mutually insulated.   Main features *Shangyin linear slide rail group is used for guiding, and the guiding accuracy is extremely high to ensure zero clearance between the upper and lower cutters and long service life, the upper and lower die are flat; *Simple operation, high efficiency, stable temperature and good consistency. *Using fixtures to assist the feeding, the cylinder drives the mold to achieve shaping. *Set a product positioning tray to facilitate the positioning and placement of batteries; *Beautiful, reliable, convenient and fast; *The speed of the upper and lower platens and the shaping time can be adjusted and set; *The upper and lower cutters are made of high-speed steel, with sharp blades; *Double cutters are insulated from each other; *The cylinder controls the cutter to trim the battery pole piece and tab, which is easy to be automated; *Set the product positioning tray to facilitate the positioning and placement of the batteries. *Beautiful, reliable, convenient and fast;   Technical parameter Mold hardness ≥HRC58 Mold life 3 million times / grinding Upper and lower pressure plate material Imported S136 material, no deformation, no rust Shaping temperature RT~250℃ The distance between the upper and lower pressing plates >50mm Single cutter 80mm long Insulation The left and right cutters are insulated from each other Position The blade positioning block of the tab cutting machine and the battery side positioning block are adjustable Cutter life 1 million times/grinding Speed Air pressure 600 times/hour Air compressed air source 0.5Mpa~0.7Mpa                   

  • tabs cutting and shaping machine Battery Tab Shaping Press&Cutting Machine for Prismatic Cell

    Battery Tab Shaping Press&Cutting Machine for Prismatic Cell 1. 1  Function: this is  special  design  for cut  and  shaping press  of stacking  cell  after tab welded. 1.2  After placing the tab weld cell in place, step on the foot switch, the cylinder drives the upper pressure block and the knife to move downwards to cut off the excess stacking material and tabs, and then move the station to press the remaining tabs to flatten.   Technical parameter Compressed air 0.5-0.8 MPa Cutting pressure ≤1000Kgf Cutting strock 15mm Cutter length 200mm Press pressure ≤1000Kgf Working speed 300-500 times/hour, accoridng to real process parameter Equipment weight About 140kg   Appearance Colour According to customer requirement, customer provide colour plate Voltage Single-phase: 220V/60Hz Power 100W   Suitable battery width <225mm( this is standard machine, will custom accoridng to customer’s real battery dimention)       Process performance 1. Manual feeding and unloading; 2. Manual conversion between cutting and flattening; 3. Manual or foot control action; 4. With automatic counting function; 5. There are safety protection door panels around.                   

Go To Page