High-Precision Slurry De-ironing Filtration & Transfer System

High-Precision Slurry De-ironing Filtration & Transfer System I. Flow Diagram & Description: #1 Scheme:   #2 Scheme:   1. The slurry contained in the transfer tank is conveyed via a diaphragm pump through filtration and iron-removal equipment before being delivered to the coating machine's hopper.   2. All components are interconnected using quick-release couplings and mounted on a stainless steel tray. The slurry transfer process is regulated by the piping network and control system.   3. Crucial Note: The connecting pipeline valves and level control mechanisms between this system and the coating hopper/storage tank must be installed and managed by the end-user and coating machine supplier, as these elements are specifically tailored to your facility and selected coating line configuration.   II. Equipment Composition & Capacity: No. Name Model/Specification Unit Qty Remarks 1 Pneumatic double diaphragm pump 3/4″ – S.K.Y. or Graco pcs 1 With standard ISO quickconnect 2 Filter cartridge Φ76 × 200 mm pcs 1 100–250 mesh 3 Magnetic rod Φ25 × 156 mm pcs 3 10,000 Gauss each 4 Pressure gauge Ø60 mm – 1 MPa pcs 1 SUS304 stainless steel 5 Squeegee (scraper) 3piece scraper set pcs 1 Squeegee material: PTFE (Teflon); Spring in Japanese stainless steel 6 Connection tube/valve/fittings Ø25 mm set 1 SUS304 stainless steel 7 Stainless steel tray Nonstandard (L×W×H) mm pcs 1 SUS304 stainless steel 8 System control cabinet Level, pressure, alarm, control pcs 1 SUS304 stainless steel 9 Conveyance capacity Operating capacity: 20 L/min – – –   III. Other Instructions & Cautions: 1. Shaft seal, squeegee, and filter cartridge are consumable parts. 2. This system is intended for a single slurry formulation in continuous production—frequent batch changes or intermittent operation should be avoided. 21. When changing slurry types, flush pipes and magnetic filters, and replace key parts (filter cartridge, mesh), and preferably replace piping too.   22. During normal operation, ensure the pipelines remain filled with slurry to prevent air ingress and moisture, which can cause slurry solidification. 23. External dimensions: 500 mm × 1000 mm × 900 mm (L × W × H).    

200L Pneumatic Lifter for Mixer

200L Pneumatic Lifter for Mixer I. Equipment Features Application Scope l Lifting the transfer barrel cover assembly.   II. Main Equipment Parameters Control System & Performance l Air Pressure: 0.5 – 0.6 MPa (dry compressed air) l Air Consumption: 15 L/min l Lift Control Panel: Manual directional valve with self‑lock l Control Mode: Manual l Rated Load: ≤ 360 kg l Machine Weight: ≈ 420 kg l Dimensions: L 1290 × W 1220 × H 1691 mm (raised 2491 mm) l Color: Off‑white l Floor Load: 400 kg/m²   III. Key Components Brand No. Item Spec. Material Qty Brand 1 Cylinder ΦD × ΦN Al‑alloy 1 Airtac 2 Pneumatic Valve – – 1 Airtac   IV. Supporting Conditions No. Item Standard Requirements 1 Workshop Height > 2.5 m; ensure lift clearance 2 Door Size H > 2.0 m; W > 1.0 m 3 Heating Room > 20 °C to keep lubricants fluid 4 Installation Space As per layout 5 Others No corrosive / explosive gases or liquids   Slurry De-Ironing, Filtration & Transfer System Model: HDCG-3/4"-3 I. Process Diagram & Description 1. Slurry stored in the transfer tank is pumped (diaphragm pump) through pipelines for filtration & de‑ironing, then delivered to the coating‑machine hopper. 2. All components are connected via quick fittings and fixed on a stainless tray; transfer is managed by the control system & piping. 3. Note: Valve & level‑control between this system and the coating hopper/tank shall be installed and managed by the customer & coater supplier.   II. Equipment Configuration & Capacity No. Name Spec. / Model Unit Qty Remarks 1 Pneumatic Diaphragm Pump 3/4" – Skylink or Graco set 1 with ISO quick clamp 2 Filter Cartridge Φ76 × 200 mm (100–250 mesh) pc 1 – 3 Magnetic Bars Φ25 × 156 mm, 10 000 GS pc 3 – 4 Pressure Gauge Φ60, 0–1 MPa, SUS304 pc 1 – 5 Scraper Assembly Triple‑blade, PTFE scrapers / SS springs set 1 – 6 Tubes & Valves Φ25, SUS304 set 1 – 7 Stainless Tray Custom size (L × W × H) pc 1 SUS304 8 Control Box Level, pressure, alarm, control pc 1 SUS304 9 Transfer Capacity 20 L/min – – working flow   III. Additional Notes & Precautions 1. Shaft seals, scrapers, and filter elements are consumables. 2. System is intended for single‑slurry, continuous production; frequent formulation change or batch interruption is discouraged. 3. When changing material system, clean lines & magnetic filter and replace key parts (filters), preferably new tubing. 4. Keep pipelines filled with slurry to avoid air/moisture ingress that may cause gelation. 5. Overall Dimensions: L 500 × W 1000 × H 900 mm