200L Pneumatic Lifter for Planetary Vacuum Mixer

200L Pneumatic Lifter for Planetary Vacuum Mixer   Ⅰ. Equipment Features: Application Scope Lifting device for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System l Air Supply Pressure: 0.5 MPa ~ 0.6 MPa (dry compressed air) l Air Consumption: 15 L/min l Lift Operation Panel: Manual directional valve (with self-locking function) l Control Mode: Manual l Lifting Capacity: ≤ 360 kg l Total Machine Weight: Approx. 420 kg l Equipment Dimensions: L1290 mm × W1220 mm × H1691 mm (raised height: 2491 mm) l Appearance Color: Ivory white l Floor Load Capacity: 400 kg/m²   Ⅲ. Key Component Brands: No. Name Specification Material Quantity Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac     Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 2.5 m; Sufficient clearance for machine lifting and maintenance; Clean and level surface 2 Door Dimensions Height > 2.0 m; Width > 1.0 m; To allow equipment access 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease from gelling in the cylinder and ensure smooth lifting and lubrication system operation 4 Installation Space Arrange according to the general layout plan 5 Others No corrosive gases or liquids, no explosive gases      

30L Lifting Device for Planetary Vacuum Mixer for Lithium Battery Lab & Production Slurry Preparation

30L Lifting Device for Planetary Vacuum Mixer for Lithium Battery Lab & Production Slurry Preparation Ⅰ. Equipment Features: Application Scope Lifting device for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System Air Supply Pressure: 0.5–0.6 MPa (utilizing dry compressed air) Air Consumption: 15 liters per minute Lift Control Panel: Manual directional valve (equipped with a self-locking feature) Control Mode: Manual operation Lifting Capacity: Maximum 200 kg Equipment Weight: Approximately 350 kg Dimensions: 1260 mm (L) × 792 mm (W) × 1497 mm (H) (Raised height: 2097 mm) Exterior Color: Ivory white Floor Load Requirement: 400 kg per square meter   Ⅲ. Key Component Brands: No. Name Specification Material Qty Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac   Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 2.0 m; Ensure clearance for lifting and maintenance; Clean and level floor 2 Door Size Height > 1.5 m; Width > 1.0 m; For equipment transport 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease from gelling in the cylinder and ensure smooth lifting and lubrication system operation 4 Installation Space Refer to the overall layout plan 5 Others No corrosive or explosive gases or liquids        

100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines

100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines Ⅰ. Equipment Features: Application Scope After the slurry is prepared by the mixer, the bucket is moved to the lifting machine, covered with a mixing head to form a transfer tank. This setup completes slurry transfer from the mixing area to storage or coating area. The slurry is delivered to the main storage tank or coater via quick-connect adapters.   Ⅱ. Main Technical Parameters: Container Parameters l Design Total Volume: 140 L l Effective Volume: 45–100 L l Inner Diameter: 596 mm l Inner Depth: 500 mm l Material (contacting with medium): SS304 l Jacket Type: Single-layer on side and bottom, for heating or cooling l Jacket Connection: G3/4″ quick coupling, pressure ≤0.4 MPa l Jacket Circulation: Customer-supplied; inlet ≤8 °C, flow >40 L/min l Discharge: One G1-1/2″ three-piece ball valve at bottom with 2″ ISO quick coupling l Ambient Temperature: –10 °C to +120 °C l Movement: On casters l Interchangeable with 100 L mixer bucket   Mixing Components l Frequency: 50 Hz l Mixing Motor Power: 1.1 kW (1 unit) l Mixing Speed: 42 rpm (fixed) l Impeller Diameter: 576 mm l Impeller Type: Inclined paddle screw strip l Material: SS304 l Tip Speed: 1.2 m/s l Number of Impellers: 1 l Number of Shafts: 1 l Clearance (impeller to wall): 10 mm l Clearance (impeller to bottom): 8 mm l Principle: Prevents sedimentation with unique impeller design   Top Cover Components l Material: SS304 l Feed Port: ISO standard quick coupling 1″ ×1 l Sight Glasses: DN80 tempered glass ×2 l Vacuum Port: G3/4″ ×1 set (vacuum/vent) l Digital Vacuum Gauge Port: M14×1.5 internal thread ×1   l Control System l Cabinet: Houses inverter and low-voltage components l Manual Panel: Buttons, knobs, instruments l Power: AC 3×380 V ±5%, 50 Hz l Control: Electrical l Operation: Cabinet panel with buttons/knobs l Emergency Stop: 1 l Start Button: 1 l Stop Button: 1 l Work Light Switch: 1   Safety Interlock System Emergency Stop: Immediately halts the system; prevents any further operation   Other Notes l Seals: Domestic brand; static by O-ring, dynamic by mechanical or skeleton seal l Grease: Domestic l Valves: Domestic l Vacuum Requirement: Customer to supply vacuum system, 8 L/s (2X-8) l Vacuum Retention: –0.098 MPa; holds >–0.085 MPa for 24 h without leakage l Main Power: >1 kW l Weight: Approx. 250 kg l Dimensions: L830 mm × W830 mm × H1474.5 mm l Color: Ivory white l Floor Load: 400 kg/m²   Ⅲ. List of Standard Wear Parts: No. Name Specification Material Quantity Remarks 1 Top Lid Seal Ring ΦD×ΦN Silicone 1 Matched to model, per supplier standard 2 Sight Glass Seal Ring — Silicone 2 Matched to model, per supplier standard 3 Feed Port Gasket — Silicone 1 Matched to model, per supplier standard 4 Sight Glass Pane Tempered Glass 2 pcs Matched to model, per supplier standard   Ⅳ. Supporting Conditions: No. Item Standard Requirement 5 Workshop Height >3.0 m; ensure lift space and maintenance clearance; floor must be clean, level 6 Door Dimensions Height >2.0 m; Width >1.5 m; ensure equipment can pass through 7 Cooling Water Must meet cooling demand; forced cooling preferred; heating in winter optional 8 Heating Maintain >20 °C in winter to avoid hydraulic oil solidifying; ensure lubrication 9 Installation Space Follow layout drawing 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic pump and other uses 11 Other No corrosive/explosive gases or liquids      

Small Vacuum Mixer Machine for Battery R&D

Small Vacuum Mixer Machine for Battery R&D Product Description This vacuum mixer is a high-efficiency device that integrates vacuum mixing and dispersion, making it ideal for mixing cathode and anode slurries in battery research, as well as blending powder materials and various ceramics. Since the mixing process is conducted under vacuum conditions, it completely eliminates air bubbles, thereby improving material filling efficiency and enhancing the density of the final structure. Features & Functions · Industry-leading soft sealing technology, ensuring excellent sealing performance. · Mixing motor with a variable frequency gearbox, allowing users to adjust speed and torque based on different processes and slurry viscosities. · Compact design, saving space. · Sleek and modern appearance, featuring a minimalist geometric structure. Technical SpecificationsParameter Specification Power Supply AC 220V Rated Power 150W Mixing Speed 0-320 RPM (adjustable via frequency converter) Vacuum Level ≤ -80KPa Mixing Tank Capacity 250ml stainless steel vacuum mixing tank (customizable) Mixing Time 0-9999 min (adjustable) Oscillation Mode Stepless speed regulation Machine Dimensions Approx. 330mm × 310mm × 510mm (L × W × H) Machine Weight Approx. 20kg                           

Dual-Shaft Planetary Vacuum Mixer with Two Containers (50mL&150mL )

Compact Dual-Shaft Planetary Vacuum Mixer with Two Containers (150 ml) - MSK-SFM-16 MSK-SFM-16 is a UL/CSA ready Compact Dual-Shaft Planetary Vacuum Mixer which can mix slurry much more uniform than the single shaft and remove gas bubble more efficiently. It has a built-in pump which can evacuate the mixing container to -0.08 Mpa with three segments programmable mixing speed from 0 - 600 rpm.  It is a high-quality tool for preparing battery electrode paste and various ceramic materials in the research lab.

30L Battery Slurry Planetary Vacuum Mixer

200L Vacuum Planetary Centrifugal Mixer

600L vacuum planetary mixer for battery research

600L vacuum planetary mixer for battery research

5 Liter Tri-Shaft Planetary Vacuum Mixer Machine with Vacuum Pump and Water chiller

5 Liter Tri-Shaft Planetary Vacuum Mixer with Vacuum Pump and Water chiller 1. TMAX-PJB5L is a CE Certified Vacuum Planetary Mixer with 5 liters containers and complete accessories for immediate use. The vacuum mixer produces multi-movements during stirring, including, revolution and rotation, double stirring shafts, single scattered shaft & scraping the walls to make slurry gas-bubble free and with extreme uniformity under vacuum. 2. A temperature-controlled water circulator is included to make container working at the temperature range from 50ºC to 35ºC directly and water cold stainless steel tank can promise high efficiency in mixing.  TMAX-PJB5Lis excellent for preparing LiCoO3, LiFePO4, phosphors and ceramic slurry with excellent results in dispersion and uniformity.

30L Planetary Vacuum Mixer for Preparing High-Viscosity Battery Slurry

30L Planetary Vacuum Mixer for Preparing High-Viscosity Battery Slurry I. Equipment Features Application Scope l Suitable for mixing and dispersing powder and liquid materials used in various common batteries, producing evenly blended battery slurry. It is particularly well-suited for high-viscosity processing. l Applicable viscosity range: ≤1,200,000 cP   II. Main Equipment Parameters Lower Barrel Component l Design Volume: 45L l Effective Volume: 15–30L l Inner Diameter: 400mm l Inner Depth: 360mm l Material: 304 stainless steel for all contact parts l Jacket Type: Single-layer jacket on barrel wall and bottom, for cooling or heating l Jacket Interface: G1/2", with quick-release couplings, pressure ≤0.4 MPa l Jacket Circulation: Supplied by customer; recommended inlet temperature ≤8°C, flow >15L/min l Discharge Method: G1" three-piece ball valve at barrel bottom l Design Ambient Temperature: -10 to +120°C l Mobility: Mounted on casters   Stirring Component l Working Frequency: 5–50 Hz l Stirring Power: 4000 W l Paddle Speed: 6–64 rpm l Planetary Speed: 4–42 rpm l Paddle Diameter: 218mm l Paddle Type: Spiral twist type, precision cast and machined to ensure 90° helical angle l Paddle Material: 304 stainless steel l Linear Speed: 0.08–0.84 m/s l Number of Paddles: 2 l Paddle Clearance (Between Paddles): 7±2mm l Paddle Clearance (To Wall): 4±1mm l Paddle Clearance (To Bottom): 3±1mm   Dispersing Component l Working Frequency: 5–50 Hz l Dispersing Power: 5.5 kW l Dispersing Speed: 402–4020 rpm l Disc Diameter: 110mm l Disc Type: Serrated l Disc Material: 304 stainless steel l Linear Speed: 2.3–23 m/s l Number of Discs: 2 l Number of Shafts: 1   Scraper Component l Scraper Frame Material: 304 stainless steel l Scraper Blade Material: PTFE (Teflon) l Scraping Speed: Matches planetary speed l Removable Design: Yes (scraper must be removed for high-viscosity processing)   Base and Lifting Assembly l Material: High-rigidity structural carbon steel l Lifting Method: Electric l Guiding Method: High-precision linear guide rail l Lifting Stroke: ≤50 cm   Upper Barrel Component l Material: 304 stainless steel l Powder Feeding Port: DN75 with sight glass, quick-clamp – 1 unit l Liquid Feeding Port: Shared with powder port l Spotlight Port: DN75 tempered glass sight glass – 1 unit l Vacuum Port: G3/4" female thread – 1 unit l Exhaust Port: G1/2" female thread – 1 unit l Vacuum Gauge Port: M14×1.5 female metric thread – 1 unit   Control System l Electrical Cabinet: For inverter and other low-voltage devices l Manual Control Panel: For buttons, knobs, meters l Power Supply: AC 3×380V±5%, 50Hz l Control Method: Electric + hydraulic control l Drive & Speed Control: Inverter-based l Cooling Method: Air and liquid cooling l Operation: Button + knob control on cabinet panel l Digital Temp Display: Material temperature l Emergency Stop: 1 unit l Alarm System: Over-temperature alarm, auto shutdown, alarm mute l Speed Display: Meter display on panel l Power Indicator: 1 unit l Timer: 1 unit, controls stirring and dispersion l Note: When HMI system is selected, control functions are integrated into the touchscreen   Safety Interlock System l Emergency Stop: Pressing the button stops all functions immediately l Low-Speed Stirring Start: Barrel can be lifted while stirring l High-Speed Dispersion: Only allowed when barrel is fully lifted l Operation Lock: Barrel cannot be lowered or opened during mixing l Vacuum Backflow Prevention: Special buffer tank prevents pump oil backflow l Fault Stop: Inverter has built-in protection against overload, overcurrent, overvoltage, leakage, and phase failure l Barrel Lifting: Only possible after barrel is in place l Vacuum Not Released: Barrel cannot descend until vacuum is released l Dispersion Interlock: Only starts after barrel is fully lifted l Locking Mechanism: Safety system prevents abnormal descent of barrel during operation l Dry Mixing Mode: Paddle rotates during barrel lifting   Other Notes l Temperature Sensor: Pt100 l Measurement Method: Sensor mounted on barrel wall l Bearings: High-speed – imported; low-speed – domestic l Oil Seals: O-rings for static sealing, mechanical seals for dynamic sealing (domestic) l Lubricating Grease: Domestic brand l Seal Oil: Imported l Hydraulic Cylinder & Station: Domestic brand l Valves: Domestic brand l Vacuum Requirement: Customer to provide, evacuation rate 4L/S (2X-4) l Vacuum Holding: -0.098 MPa; pressure > -0.085 MPa after 24 hours without leakage l Total Power: >9.5 kW l Weight: Approx. 1400 kg l Machine Dimensions: L1770mm × W1015mm × H1698mm l Color: Off-white l Floor Load Requirement: 1000 kg/m²   III. List of Spare & Wear Parts No. Name Specification Material Qty Remarks 1 Upper Lid Sealing Ring ΦD×ΦN Silicone 1 Matching model, as per supplier standard 2 Sight Glass Seal Ring – Silicone 2 Matching model, as per supplier standard 3 Feeding Port Gasket – Silicone 1 Matching model, as per supplier standard 4 High-Speed Mech. Seal C+SiC – 1 Matching model, as per supplier standard 5 High-Speed Timing Belt – Rubber 1 set Matching model, as per supplier standard 6 Scraper Plate – Teflon 1 Matching model, as per supplier standard 7 Sight Glass Lens – Tempered Glass 2 Matching model, as per supplier standard   IV. Supporting Conditions No. Item Standard Requirements 8 Workshop Height >3M; sufficient space for lifting and maintenance; floor must be clean and level 9 Door Size Height >2.5M; Width >1.5M; ensure equipment can pass through 10 Cooling Water Must meet cooling needs; forced cooling recommended; hot water for winter if needed 11 Heating Indoor temperature >20°C to ensure stable lifting and lubrication during winter 12 Installation Space Layout as per general arrangement drawing 13 Air Source 5–7 kgf/cm², 100 L/min; suitable for pneumatic pump applications 14 Others No corrosive or explosive gases or liquids present      

30L Planetary Vacuum Mixer Machine for Battery Slurry Mixing

1 This TMAX-PVM-5L Planetary vacuum mixer machine is a set of vacuum mixing, dispersion of efficient equipment, suitable for lithium electricity experiment process is anode paste mixing process, solder paste, silica gel, chemical industry, etc 2 This lab planetary mixer Mixing motor adopts transmission frequency adjustment,  can choose different rotational speed and torque according to different process, different viscosity. 3 The vacuum planetary mixer is excellent for preparing LiCoO3, LiFePO4, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.

200L vacuum planetary mixer for battery research

200L vacuum planetary mixer for battery research

Lithium Battery Slurry Vaccum Mixing Machine 100L Capacity Battery Mixer

Lithium Battery Slurry Vaccum Mixing Machine 100L Capacity battery mixer

Large with 200L Double Planetary Vacuum Mixer for Lithium Battery Slurry

Compact with 200L Double Planetary Vacuum Mixing for Lithium Battery Slurry