Laboratory Prismatic Cell Battery Mixing Machine Planetary Dispersed Vacuum Mixer

1 This TMAX-PVM-5L Planetary vacuum mixer machine is a set of vacuum mixing, dispersion of efficient equipment, suitable for lithium electricity experiment process is anode paste mixing process, solder paste, silica gel, chemical industry, etc 2 This lab planetary mixer Mixing motor adopts transmission frequency adjustment,  can choose different rotational speed and torque according to different process, different viscosity. 3 The vacuum planetary mixer is excellent for preparing LiCoO3, LiFePO4, Phosphors and ceramic slurry without gas bubble. And the processed material results in the better dispersion and uniformity.

500ml Compact Planetary Vacuum Mixer For Sodium-Ion Battery Research

 Compact Dual-Shaft Planetary Vacuum Mixer with a 500 mL Container TMAX-XJB is a compact dual-shaft planetary vacuum mixer. Compared to single shaft models, the dual shaft mixer comes with three segments programmable mixing speed from 0 - 600 rpm, which provides more uniform slurry mixing. It has a built-in pump for removing gas bubble, which can vacuum the mixing container to -0.08 MPa. It is a high-quality mixer tool for preparing battery electrode paste and various ceramic materials in a research lab.

30L Planetary Vacuum Mixer for Preparing High-Viscosity Battery Slurry

30L Planetary Vacuum Mixer for Preparing High-Viscosity Battery Slurry I. Equipment Features Application Scope l Suitable for mixing and dispersing powder and liquid materials used in various common batteries, producing evenly blended battery slurry. It is particularly well-suited for high-viscosity processing. l Applicable viscosity range: ≤1,200,000 cP   II. Main Equipment Parameters Lower Barrel Component l Design Volume: 45L l Effective Volume: 15–30L l Inner Diameter: 400mm l Inner Depth: 360mm l Material: 304 stainless steel for all contact parts l Jacket Type: Single-layer jacket on barrel wall and bottom, for cooling or heating l Jacket Interface: G1/2", with quick-release couplings, pressure ≤0.4 MPa l Jacket Circulation: Supplied by customer; recommended inlet temperature ≤8°C, flow >15L/min l Discharge Method: G1" three-piece ball valve at barrel bottom l Design Ambient Temperature: -10 to +120°C l Mobility: Mounted on casters   Stirring Component l Working Frequency: 5–50 Hz l Stirring Power: 4000 W l Paddle Speed: 6–64 rpm l Planetary Speed: 4–42 rpm l Paddle Diameter: 218mm l Paddle Type: Spiral twist type, precision cast and machined to ensure 90° helical angle l Paddle Material: 304 stainless steel l Linear Speed: 0.08–0.84 m/s l Number of Paddles: 2 l Paddle Clearance (Between Paddles): 7±2mm l Paddle Clearance (To Wall): 4±1mm l Paddle Clearance (To Bottom): 3±1mm   Dispersing Component l Working Frequency: 5–50 Hz l Dispersing Power: 5.5 kW l Dispersing Speed: 402–4020 rpm l Disc Diameter: 110mm l Disc Type: Serrated l Disc Material: 304 stainless steel l Linear Speed: 2.3–23 m/s l Number of Discs: 2 l Number of Shafts: 1   Scraper Component l Scraper Frame Material: 304 stainless steel l Scraper Blade Material: PTFE (Teflon) l Scraping Speed: Matches planetary speed l Removable Design: Yes (scraper must be removed for high-viscosity processing)   Base and Lifting Assembly l Material: High-rigidity structural carbon steel l Lifting Method: Electric l Guiding Method: High-precision linear guide rail l Lifting Stroke: ≤50 cm   Upper Barrel Component l Material: 304 stainless steel l Powder Feeding Port: DN75 with sight glass, quick-clamp – 1 unit l Liquid Feeding Port: Shared with powder port l Spotlight Port: DN75 tempered glass sight glass – 1 unit l Vacuum Port: G3/4" female thread – 1 unit l Exhaust Port: G1/2" female thread – 1 unit l Vacuum Gauge Port: M14×1.5 female metric thread – 1 unit   Control System l Electrical Cabinet: For inverter and other low-voltage devices l Manual Control Panel: For buttons, knobs, meters l Power Supply: AC 3×380V±5%, 50Hz l Control Method: Electric + hydraulic control l Drive & Speed Control: Inverter-based l Cooling Method: Air and liquid cooling l Operation: Button + knob control on cabinet panel l Digital Temp Display: Material temperature l Emergency Stop: 1 unit l Alarm System: Over-temperature alarm, auto shutdown, alarm mute l Speed Display: Meter display on panel l Power Indicator: 1 unit l Timer: 1 unit, controls stirring and dispersion l Note: When HMI system is selected, control functions are integrated into the touchscreen   Safety Interlock System l Emergency Stop: Pressing the button stops all functions immediately l Low-Speed Stirring Start: Barrel can be lifted while stirring l High-Speed Dispersion: Only allowed when barrel is fully lifted l Operation Lock: Barrel cannot be lowered or opened during mixing l Vacuum Backflow Prevention: Special buffer tank prevents pump oil backflow l Fault Stop: Inverter has built-in protection against overload, overcurrent, overvoltage, leakage, and phase failure l Barrel Lifting: Only possible after barrel is in place l Vacuum Not Released: Barrel cannot descend until vacuum is released l Dispersion Interlock: Only starts after barrel is fully lifted l Locking Mechanism: Safety system prevents abnormal descent of barrel during operation l Dry Mixing Mode: Paddle rotates during barrel lifting   Other Notes l Temperature Sensor: Pt100 l Measurement Method: Sensor mounted on barrel wall l Bearings: High-speed – imported; low-speed – domestic l Oil Seals: O-rings for static sealing, mechanical seals for dynamic sealing (domestic) l Lubricating Grease: Domestic brand l Seal Oil: Imported l Hydraulic Cylinder & Station: Domestic brand l Valves: Domestic brand l Vacuum Requirement: Customer to provide, evacuation rate 4L/S (2X-4) l Vacuum Holding: -0.098 MPa; pressure > -0.085 MPa after 24 hours without leakage l Total Power: >9.5 kW l Weight: Approx. 1400 kg l Machine Dimensions: L1770mm × W1015mm × H1698mm l Color: Off-white l Floor Load Requirement: 1000 kg/m²   III. List of Spare & Wear Parts No. Name Specification Material Qty Remarks 1 Upper Lid Sealing Ring ΦD×ΦN Silicone 1 Matching model, as per supplier standard 2 Sight Glass Seal Ring – Silicone 2 Matching model, as per supplier standard 3 Feeding Port Gasket – Silicone 1 Matching model, as per supplier standard 4 High-Speed Mech. Seal C+SiC – 1 Matching model, as per supplier standard 5 High-Speed Timing Belt – Rubber 1 set Matching model, as per supplier standard 6 Scraper Plate – Teflon 1 Matching model, as per supplier standard 7 Sight Glass Lens – Tempered Glass 2 Matching model, as per supplier standard   IV. Supporting Conditions No. Item Standard Requirements 8 Workshop Height >3M; sufficient space for lifting and maintenance; floor must be clean and level 9 Door Size Height >2.5M; Width >1.5M; ensure equipment can pass through 10 Cooling Water Must meet cooling needs; forced cooling recommended; hot water for winter if needed 11 Heating Indoor temperature >20°C to ensure stable lifting and lubrication during winter 12 Installation Space Layout as per general arrangement drawing 13 Air Source 5–7 kgf/cm², 100 L/min; suitable for pneumatic pump applications 14 Others No corrosive or explosive gases or liquids present      

Programmable Dual-Shaft Vacuum Mixer Machine for Preparing Battery Electrode Paste And Various Ceramic Materials

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna Whatsapp：+86 131 7450 6016 Skype: gia@tmaxcn.com