Laboratory 2L or 5L 3D Powder Mixer for Metal or Non-metal Powder Mixing Optional PP Material Jar

1100mL Vacuum Planetary Centrifugal Mill for Lithium Battery& Mixer with Two jars & Independent Speed Controlled & Mixer with Two jars

20L Double Cups Planetary Centrifugal Mixer for Powerful Dispersion And Defoaming Suitable for Epoxy Resin

1100mL Vacuum Planetary Centrifugal Mill for Lithium Battery& Mixer with Two jars & Independent Speed Controlled & Mixer with Two jars

High-Precision Slurry De-ironing Filtration & Transfer System

High-Precision Slurry De-ironing Filtration & Transfer System I. Flow Diagram & Description: #1 Scheme:   #2 Scheme:   1. The slurry contained in the transfer tank is conveyed via a diaphragm pump through filtration and iron-removal equipment before being delivered to the coating machine's hopper.   2. All components are interconnected using quick-release couplings and mounted on a stainless steel tray. The slurry transfer process is regulated by the piping network and control system.   3. Crucial Note: The connecting pipeline valves and level control mechanisms between this system and the coating hopper/storage tank must be installed and managed by the end-user and coating machine supplier, as these elements are specifically tailored to your facility and selected coating line configuration.   II. Equipment Composition & Capacity: No. Name Model/Specification Unit Qty Remarks 1 Pneumatic double diaphragm pump 3/4″ – S.K.Y. or Graco pcs 1 With standard ISO quickconnect 2 Filter cartridge Φ76 × 200 mm pcs 1 100–250 mesh 3 Magnetic rod Φ25 × 156 mm pcs 3 10,000 Gauss each 4 Pressure gauge Ø60 mm – 1 MPa pcs 1 SUS304 stainless steel 5 Squeegee (scraper) 3piece scraper set pcs 1 Squeegee material: PTFE (Teflon); Spring in Japanese stainless steel 6 Connection tube/valve/fittings Ø25 mm set 1 SUS304 stainless steel 7 Stainless steel tray Nonstandard (L×W×H) mm pcs 1 SUS304 stainless steel 8 System control cabinet Level, pressure, alarm, control pcs 1 SUS304 stainless steel 9 Conveyance capacity Operating capacity: 20 L/min – – –   III. Other Instructions & Cautions: 1. Shaft seal, squeegee, and filter cartridge are consumable parts. 2. This system is intended for a single slurry formulation in continuous production—frequent batch changes or intermittent operation should be avoided. 21. When changing slurry types, flush pipes and magnetic filters, and replace key parts (filter cartridge, mesh), and preferably replace piping too.   22. During normal operation, ensure the pipelines remain filled with slurry to prevent air ingress and moisture, which can cause slurry solidification. 23. External dimensions: 500 mm × 1000 mm × 900 mm (L × W × H).    

30L Vacuum Planetary Mixing Machine for Battery Slurry & High-Viscosity Materials

30L Vacuum Planetary Mixing Machine for Battery Slurry & High-Viscosity Materials Ⅰ. Equipment Features: Applicable Scope Once the mixer finishes preparing the slurry, tilt the 30 L bucket onto the elevator and attach the mixing head to convert it into a slurry transfer tank. This setup allows for the transfer of slurry from the mixing room to the storage and coating areas. The slurry is then delivered to the main tank or coating head through conversion fittings.   Ⅱ. Main Technical Parameters: Container Parameters l Design total volume: 45 L l Effective volume: 15–30 L l Container inner diameter: 400 mm l Container inner depth: 360 mm l Contact material: SS 304 l Temperature-jacket configuration: single-layer jacket on tank wall for heating/cooling; single-layer jacket on bottom for heating/cooling l Jacket connection: G 1/2″ quick-connect union, rated ≤0.4 MPa l Jacket circulation: customer-supplied; inlet water ≤8 °C, flow >15 L/min l Discharge port: one G 1″ three-piece ball valve at bottom; with 1″ standard ISO quick clamp l Operating ambient temperature: –10 °C to +120 °C l Mobility: mounted on casters l Interchangeable with 30 L mixer bucket   Mixing Components l Operating frequency: 50 Hz l Mixing power: 0.75 kW (one unit) l Mixing speed: 48 rpm (fixed) l Impeller diameter: 380 mm l Impeller type: inclined-paddle spiral l Impeller material: SS 304 l Impeller tip speed: 1.0 m/s l Number of impellers: 1 l Number of shafts: 1 l Clearance from impeller to tank wall: 10 mm l Clearance from impeller to tank bottom: 8 mm l Principle: unique inclined-paddle design prevents material sedimentation   Top Lid Components l Lid material: SS 304 l Feed inlet: one ISO standard 1″ quick-connect l Viewing ports: two DN50 tempered-glass sight glasses l Vacuum module: one set with G 3/4″ connections (vacuum and vent) l Mechanical vacuum gauge port: one Y60 mechanical gauge   Control System l Electrical cabinet: houses inverter and low-voltage components l Manual control panel: includes buttons, knobs, instruments l Power supply: AC 3×380 V ±5%, 50 Hz l Control method: electrical control l Operation: button + knob panel on electrical cabinet l Emergency stop: one button l Start button: one l Stop button: one l Worklight switch: one   Safety Interlock System Emergency stop: pushes E-stop, machine halts immediately; no further operation   Other Notes l Oil seals: domestic brand; static seal by O-ring, dynamic by mechanical or skeleton seal l Lubricant grease: domestic l Valves: domestic l Vacuum requirements: customer-supplied vacuum system at 8 L/s (2×8) l Vacuum retention: –0.098 MPa, must hold >–0.085 MPa for 24 h without leakage l Main power: >1 kW l Total weight: approx. 250 kg l Dimensions: L 594 mm × W 560 mm × H 1420 mm l Color: off-white l Load-bearing floor: 400 kg/m²   Ⅲ. List of Randomly Supplied Wear Parts: No. Name Specification Material Quantity Remarks 1 Lid sealing Oring ΦD×ΦN Silicone 1 Matches model; per supplier’s standard 2 Sight-glass sealing Oring — Silicone 2 Matches model; per supplier’s standard 3 Feed port sealing gasket — Silicone 1 Matches model; per supplier’s standard 4 Sight-glass pane tempered Glass 2 pcs Matches model; per supplier’s standard   Ⅳ. Supporting Conditions: No. Item Requirement 5 Workshop Height > 3.0 m; allows lifting for maintenance; floor clean and level 6 Door Opening Height > 2.0 m; Width > 1.5 m; ensures machine transport 7 Cooling Water Ensure cooling; ideally with forced supply; in winter, provide hot water 8 Heating In cold climates, maintain room > 20 °C so hydraulic oil does not solidify; ensures smooth lifting and lubrication 9 Installation Space Arrange per layout drawings 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic pumps etc. 11 Others No corrosive or explosive gases/liquids      

100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines

100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines Ⅰ. Equipment Features: Application Scope After the slurry is prepared by the mixer, the bucket is moved to the lifting machine, covered with a mixing head to form a transfer tank. This setup completes slurry transfer from the mixing area to storage or coating area. The slurry is delivered to the main storage tank or coater via quick-connect adapters.   Ⅱ. Main Technical Parameters: Container Parameters l Design Total Volume: 140 L l Effective Volume: 45–100 L l Inner Diameter: 596 mm l Inner Depth: 500 mm l Material (contacting with medium): SS304 l Jacket Type: Single-layer on side and bottom, for heating or cooling l Jacket Connection: G3/4″ quick coupling, pressure ≤0.4 MPa l Jacket Circulation: Customer-supplied; inlet ≤8 °C, flow >40 L/min l Discharge: One G1-1/2″ three-piece ball valve at bottom with 2″ ISO quick coupling l Ambient Temperature: –10 °C to +120 °C l Movement: On casters l Interchangeable with 100 L mixer bucket   Mixing Components l Frequency: 50 Hz l Mixing Motor Power: 1.1 kW (1 unit) l Mixing Speed: 42 rpm (fixed) l Impeller Diameter: 576 mm l Impeller Type: Inclined paddle screw strip l Material: SS304 l Tip Speed: 1.2 m/s l Number of Impellers: 1 l Number of Shafts: 1 l Clearance (impeller to wall): 10 mm l Clearance (impeller to bottom): 8 mm l Principle: Prevents sedimentation with unique impeller design   Top Cover Components l Material: SS304 l Feed Port: ISO standard quick coupling 1″ ×1 l Sight Glasses: DN80 tempered glass ×2 l Vacuum Port: G3/4″ ×1 set (vacuum/vent) l Digital Vacuum Gauge Port: M14×1.5 internal thread ×1   l Control System l Cabinet: Houses inverter and low-voltage components l Manual Panel: Buttons, knobs, instruments l Power: AC 3×380 V ±5%, 50 Hz l Control: Electrical l Operation: Cabinet panel with buttons/knobs l Emergency Stop: 1 l Start Button: 1 l Stop Button: 1 l Work Light Switch: 1   Safety Interlock System Emergency Stop: Immediately halts the system; prevents any further operation   Other Notes l Seals: Domestic brand; static by O-ring, dynamic by mechanical or skeleton seal l Grease: Domestic l Valves: Domestic l Vacuum Requirement: Customer to supply vacuum system, 8 L/s (2X-8) l Vacuum Retention: –0.098 MPa; holds >–0.085 MPa for 24 h without leakage l Main Power: >1 kW l Weight: Approx. 250 kg l Dimensions: L830 mm × W830 mm × H1474.5 mm l Color: Ivory white l Floor Load: 400 kg/m²   Ⅲ. List of Standard Wear Parts: No. Name Specification Material Quantity Remarks 1 Top Lid Seal Ring ΦD×ΦN Silicone 1 Matched to model, per supplier standard 2 Sight Glass Seal Ring — Silicone 2 Matched to model, per supplier standard 3 Feed Port Gasket — Silicone 1 Matched to model, per supplier standard 4 Sight Glass Pane Tempered Glass 2 pcs Matched to model, per supplier standard   Ⅳ. Supporting Conditions: No. Item Standard Requirement 5 Workshop Height >3.0 m; ensure lift space and maintenance clearance; floor must be clean, level 6 Door Dimensions Height >2.0 m; Width >1.5 m; ensure equipment can pass through 7 Cooling Water Must meet cooling demand; forced cooling preferred; heating in winter optional 8 Heating Maintain >20 °C in winter to avoid hydraulic oil solidifying; ensure lubrication 9 Installation Space Follow layout drawing 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic pump and other uses 11 Other No corrosive/explosive gases or liquids      

300L Planetary Vacuum Mixing Equipment for Battery Slurry & High-Viscosity Substances

300L Planetary Vacuum Mixing Equipment for Battery Slurry & High-Viscosity Substances Ⅰ. Equipment Features: Application Scope Once slurry preparation in the mixer is complete, the tank is shifted to the lifting platform, fitted with a mixing head, and converted into a slurry transfer tank. It supports slurry transfer from the mixing area to storage and coating sections, delivering slurry to the main tank or coater head via quick-connect adapters.   Ⅱ. Main Technical Parameters: Container Parameters l Design Total Volume: 395 L l Effective Volume: 130–300 L l Inner Diameter: 836 mm l Inner Depth: 720 mm l Contact Material: SS304 l Jacket Type: Single layer on wall and bottom for heating/cooling l Jacket Connection: G1″ quick connect, rated ≤ 0.4 MPa l Jacket Circulation: Supplied by customer; inlet ≤ 8 °C, flow > 80 L/min l Discharge: One G1 1/2″ three piece ball valve at bottom with 2″ ISO quick connect l Ambient Temperature: –10 °C to +120 °C l Mobility: Caster mounted l Compatible with 300 L mixer bucket   Mixing Components l Frequency: 50 Hz l Mixer Power: 3.0 kW (1 unit) l Mixing Speed: 30 rpm (fixed) l Impeller Diameter: 776 mm l Impeller Style: Inclined paddle screw l Impeller Material: SS304 l Tip Speed: 1.2 m/s l Impellers: 1 l Shafts: 1 l Clearance to Wall: 30 mm l Clearance to Bottom: 10 mm l Principle: Unique inclined paddle design prevents sedimentation   Top Cover Components l Material: SS304 l Feeding Port: ISO quick connect 1″ (1 unit) l Sight Glasses: DN100 tempered glass (2 units) l Vacuum Port: G1″ quick connect (vacuum/vent) l Digital Vacuum Gauge Port: M14×1.5 internal thread (1 unit)   l Control System l Cabinet: houses inverter and lowvoltage devices l Manual Panel: buttons, knobs, instruments l Power: AC 3×380 V ±5%, 50 Hz l Control Mode: electric l Operation: cabinet panel buttons + knobs l Emergency Stop: 1 l Start Button: 1 l Stop Button: 1 l Work light Switch: 1   Safety Interlock Emergency Stop immediately halts all operations; no further action possible   Additional Notes l Seals: domestic; static by O ring, dynamic by mechanical/skeleton seal l Grease: domestic l Valves: domestic l Vacuum Requirement: customer provides ≥ 15 L/s (2×15) vacuum system l Vacuum Retention: –0.098 MPa, holds > –0.085 MPa for 24 h without leakage l Main Power: > 3 kW l Weight: ~275 kg l Dimensions: L11420 mm × W1088 mm × H1845 mm l Color: Ivory white l Floor Load Capacity: 600 kg/m²   Ⅲ. List of Spare Wear Parts: No. Name Specification Material Qty Remarks 1 Top lid sealing O ring ΦD×ΦN Silicone 1 Matched to model, per supplier 2 Sight glass sealing ring — Silicone 2 Matched to model, per supplier 3 Feed port gasket — Silicone 1 Matched to model, per supplier 4 Sight glass pane Tempered glass Glass 2 Matched to model, per supplier   Ⅳ. Supporting Installation Requirements: No. Item Standard Requirement 5 Workshop Height > 3.0 m; clearance for lift operation and maintenance; clean & level floor 6 Door Size Height > 2.0 m; Width > 1.5 m; to allow equipment entry/exit 7 Cooling Water Must meet heat load requirements; forced system preferred; hot water in winter 8 Heating Maintain > 20 °C in winter to prevent hydraulic oil from gelling; ensure lubrication 9 Installation Space As per layout drawing 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic operation 11 Others No corrosive/explosive gases or liquids        

30L Lifting Device for Planetary Vacuum Mixer for Lithium Battery Lab & Production Slurry Preparation

30L Lifting Device for Planetary Vacuum Mixer for Lithium Battery Lab & Production Slurry Preparation Ⅰ. Equipment Features: Application Scope Lifting device for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System Air Supply Pressure: 0.5–0.6 MPa (utilizing dry compressed air) Air Consumption: 15 liters per minute Lift Control Panel: Manual directional valve (equipped with a self-locking feature) Control Mode: Manual operation Lifting Capacity: Maximum 200 kg Equipment Weight: Approximately 350 kg Dimensions: 1260 mm (L) × 792 mm (W) × 1497 mm (H) (Raised height: 2097 mm) Exterior Color: Ivory white Floor Load Requirement: 400 kg per square meter   Ⅲ. Key Component Brands: No. Name Specification Material Qty Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac   Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 2.0 m; Ensure clearance for lifting and maintenance; Clean and level floor 2 Door Size Height > 1.5 m; Width > 1.0 m; For equipment transport 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease from gelling in the cylinder and ensure smooth lifting and lubrication system operation 4 Installation Space Refer to the overall layout plan 5 Others No corrosive or explosive gases or liquids        

200L Pneumatic Lifter for Planetary Vacuum Mixer

200L Pneumatic Lifter for Planetary Vacuum Mixer   Ⅰ. Equipment Features: Application Scope Lifting device for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System l Air Supply Pressure: 0.5 MPa ~ 0.6 MPa (dry compressed air) l Air Consumption: 15 L/min l Lift Operation Panel: Manual directional valve (with self-locking function) l Control Mode: Manual l Lifting Capacity: ≤ 360 kg l Total Machine Weight: Approx. 420 kg l Equipment Dimensions: L1290 mm × W1220 mm × H1691 mm (raised height: 2491 mm) l Appearance Color: Ivory white l Floor Load Capacity: 400 kg/m²   Ⅲ. Key Component Brands: No. Name Specification Material Quantity Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac     Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 2.5 m; Sufficient clearance for machine lifting and maintenance; Clean and level surface 2 Door Dimensions Height > 2.0 m; Width > 1.0 m; To allow equipment access 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease from gelling in the cylinder and ensure smooth lifting and lubrication system operation 4 Installation Space Arrange according to the general layout plan 5 Others No corrosive gases or liquids, no explosive gases      

300L Pneumatic Lifter for Planetary Vacuum Mixing Machine

300L Pneumatic Lifter for Planetary Vacuum Mixing Machine Ⅰ. Equipment Features: Application Scope Lifting equipment for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System Air Supply Pressure: 0.5–0.6 MPa (dry compressed air) Air Flow Rate: 15 L/min Lift Control Panel: Manual directional valve with self-locking mechanism Control Type: Manual Maximum Lifting Capacity: Up to 470 kg Gross Machine Weight: Approximately 470 kg Overall Dimensions: 1800 mm (L) × 1400 mm (W) × 1775 mm (H) Raised Height: 2675 mm Exterior Finish: Ivory white Floor Loading Requirement: 400 kg/m²   Ⅲ. Key Component Brands: No. Name Specification Material Quantity Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac     Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 3.5 m; Sufficient height clearance for machine lifting and maintenance; clean and level 2 Door Dimensions Height > 2.0 m; Width > 1.5 m; Ensure access for equipment transport 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease in the cylinder from gelling and to ensure smooth lifting and proper lubrication 4 Installation Space Layout should follow the general site plan 5 Others No corrosive gases or liquids, no explosive gases      

60L Planetary Vacuum Mixing Machine

1 TMAX-XFZH30 Vacuum Planetary Mixer is a vacuum mixing machine with 30 liter containers and complete accessories for immediate use. 2 The TMAX-XFZH30 adopts Low-speed stirrer scattered and installed on the high-speed shaft of zigzag dispersion plate with both rotation and revolution; At the same time combined with stirring Plasma low clearance design, low speed impeller make the material produces strong kneading movement interference and control/up and down and circular motion; High speed dispersion plate is strong shear break up material, So as to ultimately ensure that materials are fully dispersed and mixed evenly (mixed). 3 TMAX-XFZH30 Vacuum Planetary Mixer is excellent for preparing LiCoO3, LiFePO4, phosphors and ceramic slurry with excellent results in dispersion and uniformity.