30L Planetary Vacuum Mixer for Preparing High-Viscosity Battery Slurry

30L Planetary Vacuum Mixer for Preparing High-Viscosity Battery Slurry I. Equipment Features Application Scope l Suitable for mixing and dispersing powder and liquid materials used in various common batteries, producing evenly blended battery slurry. It is particularly well-suited for high-viscosity processing. l Applicable viscosity range: ≤1,200,000 cP   II. Main Equipment Parameters Lower Barrel Component l Design Volume: 45L l Effective Volume: 15–30L l Inner Diameter: 400mm l Inner Depth: 360mm l Material: 304 stainless steel for all contact parts l Jacket Type: Single-layer jacket on barrel wall and bottom, for cooling or heating l Jacket Interface: G1/2", with quick-release couplings, pressure ≤0.4 MPa l Jacket Circulation: Supplied by customer; recommended inlet temperature ≤8°C, flow >15L/min l Discharge Method: G1" three-piece ball valve at barrel bottom l Design Ambient Temperature: -10 to +120°C l Mobility: Mounted on casters   Stirring Component l Working Frequency: 5–50 Hz l Stirring Power: 4000 W l Paddle Speed: 6–64 rpm l Planetary Speed: 4–42 rpm l Paddle Diameter: 218mm l Paddle Type: Spiral twist type, precision cast and machined to ensure 90° helical angle l Paddle Material: 304 stainless steel l Linear Speed: 0.08–0.84 m/s l Number of Paddles: 2 l Paddle Clearance (Between Paddles): 7±2mm l Paddle Clearance (To Wall): 4±1mm l Paddle Clearance (To Bottom): 3±1mm   Dispersing Component l Working Frequency: 5–50 Hz l Dispersing Power: 5.5 kW l Dispersing Speed: 402–4020 rpm l Disc Diameter: 110mm l Disc Type: Serrated l Disc Material: 304 stainless steel l Linear Speed: 2.3–23 m/s l Number of Discs: 2 l Number of Shafts: 1   Scraper Component l Scraper Frame Material: 304 stainless steel l Scraper Blade Material: PTFE (Teflon) l Scraping Speed: Matches planetary speed l Removable Design: Yes (scraper must be removed for high-viscosity processing)   Base and Lifting Assembly l Material: High-rigidity structural carbon steel l Lifting Method: Electric l Guiding Method: High-precision linear guide rail l Lifting Stroke: ≤50 cm   Upper Barrel Component l Material: 304 stainless steel l Powder Feeding Port: DN75 with sight glass, quick-clamp – 1 unit l Liquid Feeding Port: Shared with powder port l Spotlight Port: DN75 tempered glass sight glass – 1 unit l Vacuum Port: G3/4" female thread – 1 unit l Exhaust Port: G1/2" female thread – 1 unit l Vacuum Gauge Port: M14×1.5 female metric thread – 1 unit   Control System l Electrical Cabinet: For inverter and other low-voltage devices l Manual Control Panel: For buttons, knobs, meters l Power Supply: AC 3×380V±5%, 50Hz l Control Method: Electric + hydraulic control l Drive & Speed Control: Inverter-based l Cooling Method: Air and liquid cooling l Operation: Button + knob control on cabinet panel l Digital Temp Display: Material temperature l Emergency Stop: 1 unit l Alarm System: Over-temperature alarm, auto shutdown, alarm mute l Speed Display: Meter display on panel l Power Indicator: 1 unit l Timer: 1 unit, controls stirring and dispersion l Note: When HMI system is selected, control functions are integrated into the touchscreen   Safety Interlock System l Emergency Stop: Pressing the button stops all functions immediately l Low-Speed Stirring Start: Barrel can be lifted while stirring l High-Speed Dispersion: Only allowed when barrel is fully lifted l Operation Lock: Barrel cannot be lowered or opened during mixing l Vacuum Backflow Prevention: Special buffer tank prevents pump oil backflow l Fault Stop: Inverter has built-in protection against overload, overcurrent, overvoltage, leakage, and phase failure l Barrel Lifting: Only possible after barrel is in place l Vacuum Not Released: Barrel cannot descend until vacuum is released l Dispersion Interlock: Only starts after barrel is fully lifted l Locking Mechanism: Safety system prevents abnormal descent of barrel during operation l Dry Mixing Mode: Paddle rotates during barrel lifting   Other Notes l Temperature Sensor: Pt100 l Measurement Method: Sensor mounted on barrel wall l Bearings: High-speed – imported; low-speed – domestic l Oil Seals: O-rings for static sealing, mechanical seals for dynamic sealing (domestic) l Lubricating Grease: Domestic brand l Seal Oil: Imported l Hydraulic Cylinder & Station: Domestic brand l Valves: Domestic brand l Vacuum Requirement: Customer to provide, evacuation rate 4L/S (2X-4) l Vacuum Holding: -0.098 MPa; pressure > -0.085 MPa after 24 hours without leakage l Total Power: >9.5 kW l Weight: Approx. 1400 kg l Machine Dimensions: L1770mm × W1015mm × H1698mm l Color: Off-white l Floor Load Requirement: 1000 kg/m²   III. List of Spare & Wear Parts No. Name Specification Material Qty Remarks 1 Upper Lid Sealing Ring ΦD×ΦN Silicone 1 Matching model, as per supplier standard 2 Sight Glass Seal Ring – Silicone 2 Matching model, as per supplier standard 3 Feeding Port Gasket – Silicone 1 Matching model, as per supplier standard 4 High-Speed Mech. Seal C+SiC – 1 Matching model, as per supplier standard 5 High-Speed Timing Belt – Rubber 1 set Matching model, as per supplier standard 6 Scraper Plate – Teflon 1 Matching model, as per supplier standard 7 Sight Glass Lens – Tempered Glass 2 Matching model, as per supplier standard   IV. Supporting Conditions No. Item Standard Requirements 8 Workshop Height >3M; sufficient space for lifting and maintenance; floor must be clean and level 9 Door Size Height >2.5M; Width >1.5M; ensure equipment can pass through 10 Cooling Water Must meet cooling needs; forced cooling recommended; hot water for winter if needed 11 Heating Indoor temperature >20°C to ensure stable lifting and lubrication during winter 12 Installation Space Layout as per general arrangement drawing 13 Air Source 5–7 kgf/cm², 100 L/min; suitable for pneumatic pump applications 14 Others No corrosive or explosive gases or liquids present      

30L Vacuum Planetary Mixing Machine for Battery Slurry & High-Viscosity Materials

30L Vacuum Planetary Mixing Machine for Battery Slurry & High-Viscosity Materials Ⅰ. Equipment Features: Applicable Scope Once the mixer finishes preparing the slurry, tilt the 30 L bucket onto the elevator and attach the mixing head to convert it into a slurry transfer tank. This setup allows for the transfer of slurry from the mixing room to the storage and coating areas. The slurry is then delivered to the main tank or coating head through conversion fittings.   Ⅱ. Main Technical Parameters: Container Parameters l Design total volume: 45 L l Effective volume: 15–30 L l Container inner diameter: 400 mm l Container inner depth: 360 mm l Contact material: SS 304 l Temperature-jacket configuration: single-layer jacket on tank wall for heating/cooling; single-layer jacket on bottom for heating/cooling l Jacket connection: G 1/2″ quick-connect union, rated ≤0.4 MPa l Jacket circulation: customer-supplied; inlet water ≤8 °C, flow >15 L/min l Discharge port: one G 1″ three-piece ball valve at bottom; with 1″ standard ISO quick clamp l Operating ambient temperature: –10 °C to +120 °C l Mobility: mounted on casters l Interchangeable with 30 L mixer bucket   Mixing Components l Operating frequency: 50 Hz l Mixing power: 0.75 kW (one unit) l Mixing speed: 48 rpm (fixed) l Impeller diameter: 380 mm l Impeller type: inclined-paddle spiral l Impeller material: SS 304 l Impeller tip speed: 1.0 m/s l Number of impellers: 1 l Number of shafts: 1 l Clearance from impeller to tank wall: 10 mm l Clearance from impeller to tank bottom: 8 mm l Principle: unique inclined-paddle design prevents material sedimentation   Top Lid Components l Lid material: SS 304 l Feed inlet: one ISO standard 1″ quick-connect l Viewing ports: two DN50 tempered-glass sight glasses l Vacuum module: one set with G 3/4″ connections (vacuum and vent) l Mechanical vacuum gauge port: one Y60 mechanical gauge   Control System l Electrical cabinet: houses inverter and low-voltage components l Manual control panel: includes buttons, knobs, instruments l Power supply: AC 3×380 V ±5%, 50 Hz l Control method: electrical control l Operation: button + knob panel on electrical cabinet l Emergency stop: one button l Start button: one l Stop button: one l Worklight switch: one   Safety Interlock System Emergency stop: pushes E-stop, machine halts immediately; no further operation   Other Notes l Oil seals: domestic brand; static seal by O-ring, dynamic by mechanical or skeleton seal l Lubricant grease: domestic l Valves: domestic l Vacuum requirements: customer-supplied vacuum system at 8 L/s (2×8) l Vacuum retention: –0.098 MPa, must hold >–0.085 MPa for 24 h without leakage l Main power: >1 kW l Total weight: approx. 250 kg l Dimensions: L 594 mm × W 560 mm × H 1420 mm l Color: off-white l Load-bearing floor: 400 kg/m²   Ⅲ. List of Randomly Supplied Wear Parts: No. Name Specification Material Quantity Remarks 1 Lid sealing Oring ΦD×ΦN Silicone 1 Matches model; per supplier’s standard 2 Sight-glass sealing Oring — Silicone 2 Matches model; per supplier’s standard 3 Feed port sealing gasket — Silicone 1 Matches model; per supplier’s standard 4 Sight-glass pane tempered Glass 2 pcs Matches model; per supplier’s standard   Ⅳ. Supporting Conditions: No. Item Requirement 5 Workshop Height > 3.0 m; allows lifting for maintenance; floor clean and level 6 Door Opening Height > 2.0 m; Width > 1.5 m; ensures machine transport 7 Cooling Water Ensure cooling; ideally with forced supply; in winter, provide hot water 8 Heating In cold climates, maintain room > 20 °C so hydraulic oil does not solidify; ensures smooth lifting and lubrication 9 Installation Space Arrange per layout drawings 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic pumps etc. 11 Others No corrosive or explosive gases/liquids      

100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines

100L Vacuum Planetary Mixer: Tailored for Battery R&D Labs & High-Viscosity Industrial Production Lines Ⅰ. Equipment Features: Application Scope After the slurry is prepared by the mixer, the bucket is moved to the lifting machine, covered with a mixing head to form a transfer tank. This setup completes slurry transfer from the mixing area to storage or coating area. The slurry is delivered to the main storage tank or coater via quick-connect adapters.   Ⅱ. Main Technical Parameters: Container Parameters l Design Total Volume: 140 L l Effective Volume: 45–100 L l Inner Diameter: 596 mm l Inner Depth: 500 mm l Material (contacting with medium): SS304 l Jacket Type: Single-layer on side and bottom, for heating or cooling l Jacket Connection: G3/4″ quick coupling, pressure ≤0.4 MPa l Jacket Circulation: Customer-supplied; inlet ≤8 °C, flow >40 L/min l Discharge: One G1-1/2″ three-piece ball valve at bottom with 2″ ISO quick coupling l Ambient Temperature: –10 °C to +120 °C l Movement: On casters l Interchangeable with 100 L mixer bucket   Mixing Components l Frequency: 50 Hz l Mixing Motor Power: 1.1 kW (1 unit) l Mixing Speed: 42 rpm (fixed) l Impeller Diameter: 576 mm l Impeller Type: Inclined paddle screw strip l Material: SS304 l Tip Speed: 1.2 m/s l Number of Impellers: 1 l Number of Shafts: 1 l Clearance (impeller to wall): 10 mm l Clearance (impeller to bottom): 8 mm l Principle: Prevents sedimentation with unique impeller design   Top Cover Components l Material: SS304 l Feed Port: ISO standard quick coupling 1″ ×1 l Sight Glasses: DN80 tempered glass ×2 l Vacuum Port: G3/4″ ×1 set (vacuum/vent) l Digital Vacuum Gauge Port: M14×1.5 internal thread ×1   l Control System l Cabinet: Houses inverter and low-voltage components l Manual Panel: Buttons, knobs, instruments l Power: AC 3×380 V ±5%, 50 Hz l Control: Electrical l Operation: Cabinet panel with buttons/knobs l Emergency Stop: 1 l Start Button: 1 l Stop Button: 1 l Work Light Switch: 1   Safety Interlock System Emergency Stop: Immediately halts the system; prevents any further operation   Other Notes l Seals: Domestic brand; static by O-ring, dynamic by mechanical or skeleton seal l Grease: Domestic l Valves: Domestic l Vacuum Requirement: Customer to supply vacuum system, 8 L/s (2X-8) l Vacuum Retention: –0.098 MPa; holds >–0.085 MPa for 24 h without leakage l Main Power: >1 kW l Weight: Approx. 250 kg l Dimensions: L830 mm × W830 mm × H1474.5 mm l Color: Ivory white l Floor Load: 400 kg/m²   Ⅲ. List of Standard Wear Parts: No. Name Specification Material Quantity Remarks 1 Top Lid Seal Ring ΦD×ΦN Silicone 1 Matched to model, per supplier standard 2 Sight Glass Seal Ring — Silicone 2 Matched to model, per supplier standard 3 Feed Port Gasket — Silicone 1 Matched to model, per supplier standard 4 Sight Glass Pane Tempered Glass 2 pcs Matched to model, per supplier standard   Ⅳ. Supporting Conditions: No. Item Standard Requirement 5 Workshop Height >3.0 m; ensure lift space and maintenance clearance; floor must be clean, level 6 Door Dimensions Height >2.0 m; Width >1.5 m; ensure equipment can pass through 7 Cooling Water Must meet cooling demand; forced cooling preferred; heating in winter optional 8 Heating Maintain >20 °C in winter to avoid hydraulic oil solidifying; ensure lubrication 9 Installation Space Follow layout drawing 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic pump and other uses 11 Other No corrosive/explosive gases or liquids      

300L Planetary Vacuum Mixing Equipment for Battery Slurry & High-Viscosity Substances

300L Planetary Vacuum Mixing Equipment for Battery Slurry & High-Viscosity Substances Ⅰ. Equipment Features: Application Scope Once slurry preparation in the mixer is complete, the tank is shifted to the lifting platform, fitted with a mixing head, and converted into a slurry transfer tank. It supports slurry transfer from the mixing area to storage and coating sections, delivering slurry to the main tank or coater head via quick-connect adapters.   Ⅱ. Main Technical Parameters: Container Parameters l Design Total Volume: 395 L l Effective Volume: 130–300 L l Inner Diameter: 836 mm l Inner Depth: 720 mm l Contact Material: SS304 l Jacket Type: Single layer on wall and bottom for heating/cooling l Jacket Connection: G1″ quick connect, rated ≤ 0.4 MPa l Jacket Circulation: Supplied by customer; inlet ≤ 8 °C, flow > 80 L/min l Discharge: One G1 1/2″ three piece ball valve at bottom with 2″ ISO quick connect l Ambient Temperature: –10 °C to +120 °C l Mobility: Caster mounted l Compatible with 300 L mixer bucket   Mixing Components l Frequency: 50 Hz l Mixer Power: 3.0 kW (1 unit) l Mixing Speed: 30 rpm (fixed) l Impeller Diameter: 776 mm l Impeller Style: Inclined paddle screw l Impeller Material: SS304 l Tip Speed: 1.2 m/s l Impellers: 1 l Shafts: 1 l Clearance to Wall: 30 mm l Clearance to Bottom: 10 mm l Principle: Unique inclined paddle design prevents sedimentation   Top Cover Components l Material: SS304 l Feeding Port: ISO quick connect 1″ (1 unit) l Sight Glasses: DN100 tempered glass (2 units) l Vacuum Port: G1″ quick connect (vacuum/vent) l Digital Vacuum Gauge Port: M14×1.5 internal thread (1 unit)   l Control System l Cabinet: houses inverter and lowvoltage devices l Manual Panel: buttons, knobs, instruments l Power: AC 3×380 V ±5%, 50 Hz l Control Mode: electric l Operation: cabinet panel buttons + knobs l Emergency Stop: 1 l Start Button: 1 l Stop Button: 1 l Work light Switch: 1   Safety Interlock Emergency Stop immediately halts all operations; no further action possible   Additional Notes l Seals: domestic; static by O ring, dynamic by mechanical/skeleton seal l Grease: domestic l Valves: domestic l Vacuum Requirement: customer provides ≥ 15 L/s (2×15) vacuum system l Vacuum Retention: –0.098 MPa, holds > –0.085 MPa for 24 h without leakage l Main Power: > 3 kW l Weight: ~275 kg l Dimensions: L11420 mm × W1088 mm × H1845 mm l Color: Ivory white l Floor Load Capacity: 600 kg/m²   Ⅲ. List of Spare Wear Parts: No. Name Specification Material Qty Remarks 1 Top lid sealing O ring ΦD×ΦN Silicone 1 Matched to model, per supplier 2 Sight glass sealing ring — Silicone 2 Matched to model, per supplier 3 Feed port gasket — Silicone 1 Matched to model, per supplier 4 Sight glass pane Tempered glass Glass 2 Matched to model, per supplier   Ⅳ. Supporting Installation Requirements: No. Item Standard Requirement 5 Workshop Height > 3.0 m; clearance for lift operation and maintenance; clean & level floor 6 Door Size Height > 2.0 m; Width > 1.5 m; to allow equipment entry/exit 7 Cooling Water Must meet heat load requirements; forced system preferred; hot water in winter 8 Heating Maintain > 20 °C in winter to prevent hydraulic oil from gelling; ensure lubrication 9 Installation Space As per layout drawing 10 Air Supply 5–7 kgf/cm², 50 L/min; for pneumatic operation 11 Others No corrosive/explosive gases or liquids        

30L Lifting Device for Planetary Vacuum Mixer for Lithium Battery Lab & Production Slurry Preparation

30L Lifting Device for Planetary Vacuum Mixer for Lithium Battery Lab & Production Slurry Preparation Ⅰ. Equipment Features: Application Scope Lifting device for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System Air Supply Pressure: 0.5–0.6 MPa (utilizing dry compressed air) Air Consumption: 15 liters per minute Lift Control Panel: Manual directional valve (equipped with a self-locking feature) Control Mode: Manual operation Lifting Capacity: Maximum 200 kg Equipment Weight: Approximately 350 kg Dimensions: 1260 mm (L) × 792 mm (W) × 1497 mm (H) (Raised height: 2097 mm) Exterior Color: Ivory white Floor Load Requirement: 400 kg per square meter   Ⅲ. Key Component Brands: No. Name Specification Material Qty Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac   Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 2.0 m; Ensure clearance for lifting and maintenance; Clean and level floor 2 Door Size Height > 1.5 m; Width > 1.0 m; For equipment transport 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease from gelling in the cylinder and ensure smooth lifting and lubrication system operation 4 Installation Space Refer to the overall layout plan 5 Others No corrosive or explosive gases or liquids        

200L Pneumatic Lifter for Planetary Vacuum Mixer

200L Pneumatic Lifter for Planetary Vacuum Mixer   Ⅰ. Equipment Features: Application Scope Lifting device for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System l Air Supply Pressure: 0.5 MPa ~ 0.6 MPa (dry compressed air) l Air Consumption: 15 L/min l Lift Operation Panel: Manual directional valve (with self-locking function) l Control Mode: Manual l Lifting Capacity: ≤ 360 kg l Total Machine Weight: Approx. 420 kg l Equipment Dimensions: L1290 mm × W1220 mm × H1691 mm (raised height: 2491 mm) l Appearance Color: Ivory white l Floor Load Capacity: 400 kg/m²   Ⅲ. Key Component Brands: No. Name Specification Material Quantity Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac     Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 2.5 m; Sufficient clearance for machine lifting and maintenance; Clean and level surface 2 Door Dimensions Height > 2.0 m; Width > 1.0 m; To allow equipment access 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease from gelling in the cylinder and ensure smooth lifting and lubrication system operation 4 Installation Space Arrange according to the general layout plan 5 Others No corrosive gases or liquids, no explosive gases      

300L Pneumatic Lifter for Planetary Vacuum Mixing Machine

300L Pneumatic Lifter for Planetary Vacuum Mixing Machine Ⅰ. Equipment Features: Application Scope Lifting equipment for transfer tank lids.   Ⅱ. Main Technical Parameters: Control System Air Supply Pressure: 0.5–0.6 MPa (dry compressed air) Air Flow Rate: 15 L/min Lift Control Panel: Manual directional valve with self-locking mechanism Control Type: Manual Maximum Lifting Capacity: Up to 470 kg Gross Machine Weight: Approximately 470 kg Overall Dimensions: 1800 mm (L) × 1400 mm (W) × 1775 mm (H) Raised Height: 2675 mm Exterior Finish: Ivory white Floor Loading Requirement: 400 kg/m²   Ⅲ. Key Component Brands: No. Name Specification Material Quantity Remarks 1 Cylinder ΦD×ΦN Aluminum 1 Airtac 2 Pneumatic Valve — — 1 Airtac     Ⅳ. Supporting Conditions: No. Item Standard Requirement 1 Workshop Height > 3.5 m; Sufficient height clearance for machine lifting and maintenance; clean and level 2 Door Dimensions Height > 2.0 m; Width > 1.5 m; Ensure access for equipment transport 3 Heating In cold northern winters, indoor temperature must be > 20 °C to prevent grease in the cylinder from gelling and to ensure smooth lifting and proper lubrication 4 Installation Space Layout should follow the general site plan 5 Others No corrosive gases or liquids, no explosive gases