Automatic Die Cutter Machine With Roll To Roll System For Lithium Battery Electrode Cutting

MSK-180S is a gas driven die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ) Its compact design enables the operation inside a glove box with Ar atmosphere where moisture/oxygen-sensitive electrodes will be cut

Lab Electrode Die Cutter for Solid State Battery

1 TMAX-MQ300 semi-automatic electrode die cutter is mainly used for pouch cell electrode sheet cut for stacking pouch cell battery. It is a necessary tool in the production line of pouch cell to produce specific shapes of cathodes and anodes with current collector tabs.   2 This Semi Automatic Die Cutter machine adopts Safety Curtain built in the front of the machine and double start button ensures operation safety when electrode sheets are fed from the front.   3 High speed, high accuracy, long lifetime to make cutted electrode without burr, to get a good consistency.   4 This model has max die dimension with 200*300mm, if need other models, please choose the TMAX-JD-500model with max die size up to 500*500mm.

Lab Hydraulic Pouch Cell Electrode Die Cutter Cutting Machine

Lab Hydraulic Pouch Cell Electrode Die Cutter Cutting Machine Introduction This product is suitable for die-cutting and forming of battery anode and cathode sheets, as well as for die-cutting of lithium chips, and can be used in a glove box. Main features *Small size, easy to operate, can be placed in a glove box for operation. *Built-in safety overflow oil valve, the pressure can be adjusted according to needs, and the upper limit of the pressure can be set to prevent damage caused by excessive pressure caused by misoperation, ensuring the safety of the machine. *Built-in pressure gauge can observe and accurately control the sealing pressure. *Using hydraulic drive, the pressure can reach 8T, die-cutting without vibration and leakage. *It is convenient and quick to change the knife mold; * Long tool life, normal use ≥ 30,000 times; *No quality defects such as burrs, powder falling, and indentation; *Adopting four guide pillar structure, sliding up and down smoothly and high precision; * Beautiful appearance, easy maintenance, small size, convenient operation, accurate molding, etc. Instructions Put the electrode sheet into the die-cutting position, and then hold the oil unloading valve handwheel, tighten it in a clockwise direction, and rotate it to the limited position. Pry the hand rocker up and down continuously, when the jack rises and pressurizes, the movable template drives the die-cutting knife group to automatically cut the electrode sheet into shape. Hold the oil unloading valve hand wheel and unscrew the electrode sheet by half a turn counterclockwise. The mold will automatically open and take out the electrode sheet to complete. Specification Max. Punching size 120mm*100mm(can be customized as requirement) Punching accuracy ±0.1mm Max. pressure 8T Die cutting stroke 35mm Structural material High-strength chrome steel, the surface will never rust after environmental protection plating and spraying Dimensions 223mm*170mm*325mm Weight 25kg    

Automatic High Speed Battery Electrode Blanking Cutter Tool For Metal Foil Die Cutting

MSK-180S is a gas driven die cutter for producing pouch battery cathode/anode electrodes ( no electricity required ) Its compact design enables the operation inside a glove box with Ar atmosphere where moisture/oxygen-sensitive electrodes will be cut