Precision Portable Spot Welding Machine For Battery Manufacturers

1.Characteristic: This machine adopts international precision grade chip to control the welding time. There are many advantages including precise time control, good reliability, wide application, low power consumption, small size, light weight, easy to carry and operation. 2. Area of application: Suitable for welding of low carbon steel, stainless steel, copper alloy, nickel, platinum and other metal materials. 3. Example application: Series parallel welding of cell phone battery. Laptop battery board repair. Can be used in lithium batteries, nickel cadmium batteries, nickel hydrogen batteries, lithium manganese battery welding. Hand held welding, flexible and convenient. Is a good helper for battery maintenance, but also an ideal choice for battery manufacturers.

1500w Bench-top Ultrasonic Spot Welding Machine

ultrasonic Spot Welding Machine 1 The TMAX-USW-PC1500 ultrasonic metal welder machine is mainly used for Al can battery Al-Ni composite strip tab welding on Al shell for finished cell with New designed mould. 2 It can also weld Al can battery Al shell weld tab before battery finished with changing aluminum shell welding mould.

Pneumatic AC Plus Battery Spot Welding Machine for Cylindrical Battery Welding

  Pneumatic AC Plus Battery Spot Welding Machine for Cylindrical Battery Welding

4500W 20KHz Ultrasonic Spot Welder for Pouch Cell Electrodes Multi Layer Welding

4500W 20KHz Ultrasonic Spot Welder for Pouch Cell Electrodes Multi Layer Welding 1. Application scope: Multi layer welding of positive and negative electrodes of pouch cell battery Transmission line Wire terminal The connector Electromagnetic coil Multi point welding of positive and negative electrodes of battery   Welding material parameters No. Material(mm) Material(mm) Welding area 1 The thickness of copper foil is 0.010mm, 5-70 layers Ni or Cu, 0.1-0.2mm, single layer 4mm×12mm 2 The thickness of aluminum foil for battery is 0.012mm, 5-70 layers Al, 0.1-0.2mm, single layer 4mm×12mm   2. Main features * The precision sliding bearing can ensure the accurate movement of the equipment and meet the requirements of the best welding accuracy * With PLC control program, the time is more accurate * The limit can be adjusted accurately to determine the upper and lower position of welding * The up and down speed of welding head can be adjusted accurately * The welding time (ultrasonic time) can be adjusted accurately * The preloading time can be adjusted accurately * The power box can maintain stable amplitude output when the voltage fluctuates * The unique structure design can effectively transmit the ultrasonic energy to the welding head * The imported alloy steel welding head has excellent ultrasonic transmission and durable wear resistance * The overall operation is simple, the welding efficiency is high, and the welding quality is good   Functional features * Adopt American ultrasonic technology, micro processing control, automatic frequency tuning, and detect current and phase frequency at the same time; * The time is displayed by LED, which makes the time more intuitive and accurate; * The main original parts are imported with high efficiency of energy conversion and utilization; * Double automatic protection device for high frequency offset and excessive current of the circuit to ensure the stability of the equipment; * Low cost and high hardness can be used instead of changing the welding nozzle, which greatly reduces the wear of the welding nozzle. The welding head has multiple welding surfaces, which can be installed quickly and minimize the cost. The installation, debugging and operation of the equipment are simple.   3. Welding principle Ultrasonic metal welding machine is used in the battery industry with 20-4khz. Its principle is to use the energy generated by ultrasonic high-frequency mechanical vibration to weld the same or different kinds of non-ferrous metal materials. In the welding process, it neither transfers current to the work nor inputs high-temperature energy to the work. It only vibrates on the surface of the workpiece with 20-40khz high frequency, and applies heat to the workpiece Add the corresponding pressure to form a solid bonding in the workshop, so as to achieve the effect of welding. In particular, our company's latest independent research and development of high frequency (20kHz) ultrasonic metal welding machine, welding efficiency has reached the domestic advanced level.   4. Machine structure 4.1 overall structure description a. 20khz ultrasonic spot welding machine is mainly composed of ultrasonic generator, ultrasonic transducer system, upper and lower ultrasonic poles, pneumatic parts, etc; b. The circuit mode is full bridge power acoustic pole type with stable performance and strong output; c. The upper and lower electrodes are made of new imported SKD11 material with good wear resistance;   4.2 equipment cost a. The ultrasonic upper pole pattern is guaranteed for four times, and the lower pole pattern is not guaranteed; b. One foot switch is used less than or equal to 2 million times; c. The number of times the relay is used is less than or equal to 2 million;   4.3 main advantages of the equipment a. Special steel structure head: mechanical precision stable, using precision guide pillar steel structure, anti torque, to ensure fast and stable movement. The clip type installation mode is convenient for system disassembly, and the mechanical rigidity is better than the ordinary double fulcrum. In the production of customers, the efficiency is more than twice as fast as using the guide rail and double fulcrum structure, and the service life of the equipment is guaranteed for more than 10 years. b. The top and bottom ultrasonic electrodes (welding head and bottom die) are strictly selected from imported special die steel. They are wear-resistant, high temperature resistant, good toughness, high mechanical rigidity, small deformation after heat treatment, high consistency of ultrasonic output frequency, large amplitude, strong and stable mechanical high-frequency displacement. They are internationally leading professional heat treatment technology. The pattern processing adopts high-precision cold grinding processing, reaching the international level. c. Generator: the circuit adopts the international advanced full bridge voltage stabilizing circuit and is optimized to achieve constant voltage output. The working range of voltage fluctuation: 170-260v fluctuation period does not affect the output power and working frequency; it has reached the international technical level of similar products. d. Welding effect: firm welding, low internal resistance, no false welding, no vibration powder, and more than 80% of residual welding surface between metal and metal. After welding, the surface is smooth, no fold, no convex burr on the back, the solder joint is full, clear, firm and reliable, and the position of the solder joint is not broken.   4.4 safety precautions The equipment meets the factory standard. When the welding of the equipment is unstable, it is strictly forbidden to continue to use it; the upper and lower parts are vulnerable parts, please check the pattern wear regularly, and replace them in time if the wear is serious.   4.5 accurate power compensation 20khz high-power ultrasonic welding machine adopts advanced microprocessor control technology, with 5000W DC regulated power supply box, constantly monitoring the grid voltage, and constantly adjusting and compensating the output current. In this way, the rated voltage changes by + 10%, while the output current remains within + 1%.   5. Transducer 5.1 frequency difference between transducers ≤ 20Hz 5.2 impedance difference between transducers ≤ 4 Ω 5.3 capacitance difference between transducers ≤ 40pf 5.4 insulation resistance between transducer and shell ≥ 30m Ω 5.5 withstand power 4500W (peak value)   6. Ultrasonic generator 6.1 frequency control mode with built-in frequency adjustable 6.2 constant amplitude function switching power supply constant voltage constant current (constant amplitude) 6.3 amplitude stepless adjustable stepless adjustable 7. Main Specifications Model TMAX-VS-20K Frequency  20KHZ Power  4500W Demand power source 220VAC, 50/60HZ Gas demand 0.4-0.8MPa Cylinder bore 100mm Cylinder stroke 15mm Gas consumption 0.0785 m3 (1L = 0.001 m3) Intake connection Quick coupling Welding time Adjustable (0.01s-10s) Preloading time Adjustable (0.02s-1s) Frequency calculation display 0.00-50000HZ Automatic frequency tracking Range ± 20Hz Automatic temperature tracking Internal power tube 60° automatic protection EMI/EMC Strong anti-interference ability Overall dimension of welded joint 550Lx260Wx340H (mm) Overall dimension of main box 540Lx360Wx460H (mm) Total weight 60KG  

Automatic Battery Pack Double Sides Rotary Welding Head Spot Welding Machine for Energy Storage Battery Pack

Double Side Rotary Welding Head Spot Welding Machine

Solid Capacitor Stitching /Winding /Spot Welding Line Machine

Solid Capacitor Stitching /Winding /Spot Welding Line Machine   Specification: Model TMAX-XCJ-930 Supercapacitor diameter (mm) Φ5-Φ8 Electrolytic paper width (mm) 4-16 Foil width (mm) 3-14 Production speed (pcs/min) 40-60ppm External dimensions (mm) 4000*1700*1800                     

EV Battery Pack Module Automatic CNC Double Sides Spot Welding Machine for EV Battery Assembly Line

This machine is used for 18650 battery pack automatic spot welding, it can weld both side together with high speed and good effect. Features : 1. Support breakpoint start, support automatic start and manual start mode conversion. 2. It has a false spot welding and out of spot welding alarm function. 3. Programming is simple, and it supports any point programming and array programming. 999 groups can be saved programming files. 4. Welding needle replacement forecast reminder. 5. Own welding current monitoring system, real-time monitoring of welding current.

5000A/8000A Pneumatic Inverter DC Spot Welding Machine for Power Battery Pack

5000A/8000A Pneumatic Inverter DC Spot Welding Machine for Battery Pack Assembly