Steel Split Test Cell for Lithium Air Battery Research

Steel Split Test Cell for Lithium Air Battery Research EQ-STC-LI-AIR 1. The EQ-STC-LI-AIR is Split Test Cell for Lithium Air Battery Research.  2. You can control air flow pressure and test various anode and cathode material at easy.

15 mm Diameter Three-Electrode Split Test Cell for R&D Coin Cell

15 mm Diameter Three-Electrode Split Test Cell for R&D Coin Cell 1. The EQ-3ESTC split-able test cell is designed for R&D of rechargeable battery materials by testing three electrodes. 2. It is designed to test various electrodes easily and quickly by providing the user a structure to simulate assembled coin cells without the need to crimp actual coin cell cases. 3. Two sides of the test cell connect to both electrode (the anode and cathode), with the middle being connected to the reference electrode which can be used for monitoring voltage variations of the two electrodes. 4. This test cell can accept 15 mm diameter electrodes and 24mm separators.

Coin Cell Three-Electrode Split Test Cell with Pressure Gauge

Coin Cell Three-Electrode Split Test Cell with Pressure Gauge TMAX-Three-Electrode is a three-electrode split cell to test anode/cathode with reference electrode in between. It has a mechanical pressure gauge to monitor the air pressure inside chemical reaction chamber and a 1/8'' barb inlet/outlet with needle valve for gas easy in/out.   Specifications Model TMAX-Three-Electrode Features 1) Full stainless steel structure ( SS304) 2) Silicon O-ring in between the three plates to ensure good sealing and work up to 250 °C 3) Spring load on top to accept various thickness electrode 4) Easy to separate cell after test 5) Small enough to be put in and out from glove box 6) Mechanical Pressure Gauge: 1/4NPS Fitting (call for price and delivery time if need digital pressure gauge) 7) Niddle valve with 1/4" pipe adaptor Specifications Diameter insert:24 mm Pressure Range: -0.1Mpa-0.5Mpa (0 Mpa as atmosphere)