Three-Roll Hydraulic Plate Rolling Bending Press Machine

Three-Roll Hydraulic Plate Rolling Bending Press Machine   Introduction The plate rolling process of a plate rolling machine is a continuous three-point bending process of the plate. According to the different rolling temperatures, it can be divided into cold rolling, hot rolling and warm rolling. It is mainly a mechanical equipment that bends metal plates of a certain thickness into cylindrical, arc-shaped, rectangular and other curvatures or variable curvatures. It is one of the essential mechanical equipment in the metallurgy, building materials, petroleum, chemical, water conservancy and power, bridge, military industry, coal, mining, shipbuilding, boiler, aviation, power transmission and transformation equipment manufacturing industries. This machine belongs to the hydraulic three-roll plate bending machine, which is used to complete the pre-bending, rolling and straightening of the plate ends of various container carbon steel and low alloy steel plates without turning at room temperature after one feeding. The upper roller can move vertically or horizontally. Pre-bending is achieved by the horizontal movement of the upper roller, causing it to be in an asymmetrical position relative to the lower roller. The rounding process is carried out by the motor and the reducer driving the two lower rollers. Since the elevation of the lower roller remains unchanged, it is convenient for feeding and operation. Provide a detailed electrical schematic diagram. Electrical wiring must be strictly carried out in accordance with the drawing. The numbers at both ends of each connection are clear and complete. The terminal blocks of the wires are marked with the same wire number as the connection number, and corresponding marks are made on the electrical wiring diagram and schematic diagram. All the electrical components used in the equipment are high-quality products from well-known enterprises. Electrical protection devices (such as current relays, air switches, etc.) are strictly tested before installation to ensure reliable operation. The equipment operates smoothly, with flexible control, no jamming, oil leakage or abnormal noise. The tipping frame adopts hydraulic tipping, which is relatively fast. The vertical displacement of the upper roller is driven by hydraulic power, while the horizontal movement is driven by mechanical power. The equipment has high reliability and a low failure rate.   Technical parameter No Item Unit Parameters 1 Maximum thickness of the rolled plate mm T16*B3000*φ900(0s≤245MPa) 2 Maximum pre-bent plate thickness mm T12*B3000*φ900(0s≤245MPa) 3 Maximum width of the rolled plate mm 3000 4 The working length of the roller mm 3050 5 The remaining straight side length mm ≤4 times the thickness of the board 6 Apply pressure to he upper roller T 200 7 Rolling plate speed m/min 4.5 8 Upper roller diameter mm φ330 9 Diameter of the lower roller mm Ф180 10 The center distance between the two lower rollers mm 300 11 The pressure application speed of the upper roller mm/min 120 12 Number of idlers pcs 4 13 Number of idler sets pcs 1 14 Main motor power KW 15 15 Power of hydraulic motor KW 5.5 16 Power of mobile motor KW 1.5 The equipment's capacity for rolling cone cylinders is 60% of its full-load capacity The rounding capacity is 70% of the full-load capacity Oil cooling is an optional accessory  

15KN Manual Single Punch Tablet Powder Press Machine

15KN Manual Single Punch Tablet Powder Press Machine   Introduction The TDP-0 manual milk tablet machine is a small desktop manual continuous press machine and a relatively lightweight single-punch tablet machine. The total weight of the machine is 32 kilograms. It has good performance, is easy to operate and convenient to move. This machine can press round milk sheets up to 12mm in size, and manual operation is effortless. At the same time, this machine can also press various granular, crystalline or powdery raw materials with good fluidity into products of various geometric shapes (such as square, triangular, elliptical, sac-shaped, etc.), and can also press products with words, trademarks and patterns. It is suitable for use in industries such as pharmaceuticals, health products, food, agriculture, chemical engineering, electronic batteries, metallurgy and ceramics for small-batch production and scientific research experiments and teaching. This machine is equipped with only one set of punches and dies. The filling depth and pressing thickness of the material can be adjusted (that is, the weight, thickness and hardness of the product can all be adjusted). Different products can be pressed simply by changing different dies. Technical parameter Tablet pressing pressure (Kn) 15 Tablet diameter (mm) 3-12 Filling depth (mm) 12 Tablet thickness (mm) 6 Production capacity (pcs/h) about 2000 Overall dimensions (mm) 520*300*220 Overall machine weight (Kg) 32    

18000pcs/h GMP Compliant Automatic Rotary Tablet Powder Press Machine For Multi-Layer Pill Tablet Making

18000pcs/h GMP Compliant Automatic Rotary Tablet Powder Press Machine For Multi-Layer Pill Tablet Making   Introduction The multi-punch tablet press is a new type of intelligent tablet press developed by our company. It features high pressure, easy operation and maintenance. The multi-punch rotary tablet press is suitable for the pharmaceutical, chemical and food industries. The multi-punch tablet press can press pharmaceutical tablets, tablets and health products. The stainless steel rotary tablet press has stable tablet weight and sensitive adjustment. The medium-sized tablet press equipment has high precision and smooth operation. The mold, hopper, feeding device, tablet discharge port, scraper and other components of the granular tablet press are easy and quick to disassemble, and are easy to clean and maintain. The equipment is well-configured, with excellent performance of the core components, a long service life and few malfunctions.   Application It is applicable to industries such as pharmaceuticals, health products, food, and daily chemicals.   Technical parameter Model Max. pressure (KN) Max. diameter (mm) Production (pcs/h) ZP-15E 120 50 18000 ZP-19E 100 40 45600    

20000pcs/h Automatic Rotary Tablet Powder Press Compressor Machine For Pills Pressing

20000pcs/h Automatic Rotary Tablet Powder Press Compressor Machine For Pills Pressing   Introduction The multi-punch tablet press is a new type of intelligent tablet press developed by our company. It features high pressure, easy operation and maintenance. The multi-punch rotary tablet press is suitable for the pharmaceutical, chemical and food industries. The multi-punch tablet press can press pharmaceutical tablets, tablets and health products. The stainless steel rotary tablet press has stable tablet weight and sensitive adjustment. The medium-sized tablet press equipment has high precision and smooth operation. The mold, hopper, feeding device, tablet discharge port, scraper and other components of the granular tablet press are easy and quick to disassemble, and are easy to clean and maintain. The equipment is well-configured, with excellent performance of the core components, a long service life and few malfunctions.   Application It is applicable to industries such as pharmaceuticals, health products, food, and daily chemicals.   Technical parameter Model ZP-45 Structured and modular design Easy to disassemble, maintain and replace. Output 200000 pcs/h Raw materials suitable for pressing Powder, granules The types of tablets that can be compressed Circular, irregular, two-color and ring-shaped Maximum pressure 100KN The maximum diameter of tablets that can be compressed 13mm, special-shaped piece 16mm Maximum tablet thickness 8mm Comply with GMP requirements Non-toxic, odorless and anti-corrosion handwheel adjustment Accuracy The sensitivity reaches 0.1mm Power supply 380/220V 50Hz Power 5.5KW Weight 1800kg Size 1100*940*1755 mm    

60KN Laboratory Manual Single Punch Tablet Powder Press Machine

60KN Laboratory Manual Single Punch Tablet Powder Press Machine   Introduction The TDP-6 single-punch tablet press can compress powder and granular raw materials into tablets. It can be widely used in pharmaceutical factories, chemical plants, hospitals, research institutions, laboratories for trial production and small-scale production. This machine has excellent performance, strong adaptability, is easy to use, easy to maintain, small in size, light in weight and simple to operate. This machine is equipped with only one set of punches and dies. The filling depth of the material, the thickness of the tablet and the pressure can all be adjusted. It can meet the requirements of the pharmaceutical industry for pressing various Chinese and Western medicine tablets and the requirements of other industries for pressing similar products. It is widely welcomed by users in various industries. The TDP-6 single-punch tablet press can press various types of Chinese and Western medicine tablets such as Sanqi tablets, lozenges, maca tablets, candy tablets, milk tablets, and Western medicine tablets.   Technical parameter Tablet pressing pressure (Kn 0-60 Tablet diameter (mm) 0-25 Filling depth (mm 0-16 Tablet thickness (mm 0-6 Production capacity (pcs/h 3500 Motor power (Kw 1.5 single phase; 0.75 3-phase Overall dimensions (mm) 780*450*690 Overall machine weight (Kg) 150    

120KN Laboratory Manual Single Punch Pill Tablet Powder Press Maker Machine

120KN Laboratory Manual Single Punch Pill Tablet Powder Press Maker Machine   Introduction The TDP-120D single-punch tablet press can compress powder and granular raw materials into large tablets and is widely applicable to pharmaceutical factories, chemical plants, food factories, hospitals, research institutions, laboratories for trial production and small-scale production. The TDP-120D single-punch tablet press can produce tablets of special shapes such as round tablets, irregular-shaped tablets and ring-shaped tablets. This machine features high pressure, large pressed sheet diameter, and variable frequency speed regulation to adjust the operating speed of the equipment. This machine has excellent performance, strong adaptability, is easy to use and maintain. This machine has increased mechanical strength and power compared with the original TDP series tablet press, thus having a greater tablet pressing force. At the same time, the filling depth has been increased, thereby expanding the diameter and thickness range of the tablets. Therefore, this machine can meet the requirements of the pharmaceutical industry for pressing various Chinese and Western medicine tablets and similar products in other industries, and is widely welcomed by users. Technical parameter Tablet pressing pressure (Kn 120 Tablet diameter (mm) 60 Filling depth (mm 45 Tablet thickness (mm 20 Production capacity (pcs/h 2100 Motor power (Kw 4.0 Overall dimensions (mm) 620*700*850 Overall machine weight (Kg) 210    

100T-400T Automatic Vacuum Fiber Hot Press Laminate Forming Machine

100T-400T Automatic Vacuum Fiber Hot Press Laminate Forming Machine   Introduction The fiber vacuum hot press, also known as the fiber vacuum hot press forming machine, adopts a servo oil circuit system, which is low-noise, energy-saving and environmentally friendly. The unique heating system device can control temperature and pressure in sections and zones. The overall temperature difference can be controlled within ±3 degrees, ensuring the stability of the hot pressing temperature and significantly improving the product yield. It can be equipped with a mold temperature control machine function. Applicable materials 1. Fiber materials: Forming of decorative parts such as carbon fiber and glass fiber. 2. Composite materials: PC/PMMA/ABS and other composite board film sheet forming. 3. Insulation materials: Molding of insulating and heat-insulating materials such as aerogel, cold gel, silicone, PET, and filter elements. Note: The industry applications of the product are as follows. Features 1. It adopts a servo system, which is low-noise, energy-saving and environmentally friendly. It can reduce electricity consumption by up to 46%, generate less heat and operate at a low oil temperature (within 50 degrees), which can extend the service life of the hydraulic press and reduce production costs. 2. The unique heating system device can control temperature and pressure in sections and zones. The overall temperature difference can be controlled within ±3°C, ensuring the stability of the hot pressing temperature and significantly improving the product yield. 3. The equipment structure features a four-column and three-plate structure, without oil-free bushings for guidance, to achieve a parallelism of ±0.03mm between the upper and lower heating plates. . 4. The vacuum hood is used for vacuuming, with a vacuum negative pressure value of 0.1kpa. It features automatic vacuuming, automatic pressure holding, automatic pressure replenishment, and automatic vacuum breaking functions. 5. The heating plate is made of high-quality die steel for heat treatment and ground to achieve a flatness of 0.05mm. 6. The oil pump is driven by a servo motor, controlled by PLC, and combined with pressure sensors and displacement sensors for closed-loop control. It can be made into segmented pressure, time and stroke control, and can be divided into three or more segments. This product is widely used in the following industries: 1. Mobile phone industry: Front and back covers for 2.5D/3D/3.5D mobile phones, full-coverage mobile phone cases. 2. Automotive industry: Interior and exterior trims, buttons, instrument panels, touch panels, smart Windows. 3. Panel industry: Decorative panels for tablets, laptops, medical devices, home appliances and kitchen appliances, smart locks, etc. 4. Electronics industry: Drones, VR/AR glasses, smartwatches, wristbands, switches, keyboards. 5. Fiber materials: Decorative parts made of fiber materials such as carbon fiber and glass fiber, like helmets, etc. 6. Insulation materials: aerogel, cold gel, silicone frame, PET, filter element and other insulation and heat insulation materials. 7. Composite materials: PC/PMMA/ABS and other film composite plates Technical parameter Item Unit 100T 200T 300T 300T 400T Master cylinder clamping force T 100 200 300 300 400 Master cylinder stroke mm 300 400 400 400 400 The maximum pressure for the liquid in the main cylinder Mpa 21 21 21 21 21 Return stroke force KN 80 50 80 30 30 The distance between the movable beam and the workbench Max. mm 500 600 450 400 400 Min. mm 200 200 50 0 0 Slider speed Rapid decline mm/s 130 150 120 120 250 Working speed mm/s 20 20 20 20 20 Fast return journey mm/s 150 125 100 120 120 Effective area of the heating plate mm 500*580 1200*1200 600*600 600*600 750*750 The height of the workbench from the ground mm 1075 1387 1315 1315 1114 Motor power KW 16 25 25 16*2 30 Maximum temperature ºC 200 200 200 300 300 Machine weight KG 4000 5000 7000 15000 18000  

150T Automatic Vacuum Hot Press For Aerogel Insulation Pad Laminating

150T Automatic Vacuum Hot Press For Aerogel Insulation Pad Laminating  Introduction The vacuum hot press for aerogel insulation pads is driven by a precision servo motor and equipped with a PLC microcomputer touch control operating system. It performs vacuum hot pressing on the insulation pads and cools and maintains pressure at the cold pressing station to form them, ensuring comprehensive bonding of the insulation sheets without bubbles or wrinkles. An additional fully automatic heat insulation pad production line is available for selection, integrating functions such as trimming, vulcanization, edge trimming, double-sided gluing, drying, cotton loading, fine cutting, and packaging. The daily production capacity of the production line can reach up to 20,000 pieces. Applicable materials Thermal insulation materials: The pressing molding process of materials such as aerogel, cold gel, silicone, PET, CCS, and filter elements, mainly used for the hot pressing molding of thermal insulation pads for new energy vehicles and power battery cells. Features 1. It adopts a servo oil circuit system with three piston cylinders, featuring low noise, high efficiency and energy saving, and a high yield rate. 2. Electric heating is adopted, ensuring uniform and stable temperature with an error within ±5 degrees, which significantly enhances the yield of the products. 3. The vacuum adopts an oil vacuum pump, which features fast pumping speed and long service life. Vacuum pump 0.75Kw. 4. The heating plate is made of manganese steel, heat-treated and chrome-plated, which is durable and will not deform. 5. PLC microcomputer touch screen control, digital pressure control, adjustable and controllable temperature and speed, independent control of heating up and down. 6. The quality is easy to control, stable, with little product deformation and less glue overflow. 7. Simple operation and practical. Low cost, low energy consumption, space-saving and easy to maintain. 8. Heating method and temperature difference of the working surface of the hot plate (temperature sensing line) : Electric heating tube heating (±5ºC). 9. Parallelism of adjacent hot plates after pressurization (pressure-sensitive paper) : The colored area of the pressure-sensitive paper ≥80%. This product is widely used in the following industries: 1. Mobile phone industry: Front and back covers for 2.5D/3D/3.5D mobile phones, full-coverage mobile phone cases. 2. Automotive industry: Interior and exterior trims, buttons, instrument panels, touch panels, smart Windows. 3. Panel industry: Decorative panels for tablets, laptops, medical devices, home appliances and kitchen appliances, smart locks, etc. 4. Electronics industry: Drones, VR/AR glasses, smartwatches, wristbands, switches, keyboards. 5. Fiber materials: Decorative parts made of fiber materials such as carbon fiber and glass fiber. 6. Insulation materials: Aerogel, cold gel, silicone, PET, CCS, filter elements and other insulation and heat insulation materials. 7. Composite materials: PC/PMMA/ABS and other film composite plates. Technical parameters Model 109G-150T (Top-mounted type) 109G-150T (Downward press type) Nominal maximum pressure of oil (T) 150 150 Workplate size (mm) 570*1350 570*1350 Maximum usable area (mm) 500*1200 500*1200 Hydraulic cylinder Φ220mm*3pcs Φ220mm*3pcs Maximum stroke (mm) 250 250 Working height (mm) 1052 1052 Heating method Electric heating(dia14mm Bullet-type electric heating tube) Electric heating(dia14mm Bullet-type electric heating tube) Number of heating rods 32 pcs Temperature control 8 sets of temperature control (4 sets each for the upper and lower heating plates) 8 sets of temperature control (4 sets each for the upper and lower heating plates) Heating temperature RT-150ºC RT-150ºC Temperature uniformity PV±5ºC PV±5ºC Total heating power (KW) 9.6 9.6 Cylinder speed (mm/s) up ≤85 ≤120 back ≤110 ≤160 Working power supply voltage AC380V50HZ, three-phase five-wire AC380V50HZ, three-phase five-wire Working power consumption (KW) 20 20 Host dimensions (mm) 2285*1767*2113 2285*1767*2113 Total weight of the equipment About 7.5T About 7.5T    

15KN Laboratory Electric Single Punch Tablet Compression Press Machine For Pill Manufacutring

15KN Laboratory Electric Single Punch Tablet Compression Press Machine For Pill Manufacutring   Introduction The TDP-2 single-punch tablet press (variable frequency speed regulation) is a small electric tablet press equipped with a frequency converter, which can adjust the production speed. It can press various granular and powdered raw materials into round tablets of different sizes or various irregular-shaped tablets. It is an ideal equipment for the trial production and small-scale production of Chinese and Western medicine tablets, sugar tablets, calcium tablets and tablets for other industries in pharmaceutical factories, food factories, chemical plants, home clinics, laboratories, schools and research institutions. This machine is equipped with a set of punches and dies. The filling depth and pressing thickness of the material can be adjusted, that is, the weight, thickness and hardness of the product can all be adjusted. As long as different dies are replaced, different products can be pressed. All controllers and operating components are rationally laid out. Worm gear transmission, low noise and high safety factor; The film output speed is adjustable, making it suitable for high-precision requirements, laboratory trial production, etc.   Technical parameter Tablet pressing pressure (Kn) 15 Tablet diameter (mm) 3-12 Filling depth (mm) 0-12 Tablet thickness (mm) 0-6 Production capacity (pcs/h) 4000 Motor power (Kw) 0.75 Overall dimensions (mm) 700*370*800 Overall machine weight (Kg) 45 Packaging weight (kg) 60    

87000pcs/h Automatic 3 Color Pharmaceutical Drug Rotary Tablet Compression Press Machine

87000pcs/h Automatic 3 Color Pharmaceutical Drug Rotary Tablet Compression Press Machine   Introduction ZP-27/73D is a sixth-generation automatic rotary tablet press that continuously presses powders and granules into three-color tablets. It is specially designed for the production of three-color tablets. It has high pressure and is suitable for materials that are difficult to press and corrosive materials. It meets cGMP standards.   Main Features Meet cGMP requirements. The entire shell is made of stainless steel, and the tablet pressing chamber is isolated from the external environment by organic glass, with good sealing performance. All parts of the tablet pressing chamber that come into contact with the drug meet the requirements of "non-toxic, odorless, and anti-corrosion". This series of tablet presses is equipped with a pressure overload protection device. Once overloaded, it will automatically shut down to avoid equipment damage. The transmission system is independently modularized and set below the main body of the machine, effectively preventing trace debris generated by the friction of the machine from contaminating the drug. Digital display adjustment: filling depth and pressure adjustment are digitalized, and the adjustment is more precise and convenient.   Technical parameters Model ZP-27D ZP-45D ZP-73D Dies No. 25 45 73 Max. Capacity (pcs/h) 87480 202500 395000 Max. Pressure (KN) 150 80 60 Max. Dia. Of tablet (mm) 50 20 11 Max. Depth of filling (mm) 18 18 15 Max. Thickness of tablet (mm) 8 6 6    

200T Semi-Automatic Double-Layer Hydraulic Rubber Vulcanizing Press Machine

200T Semi-Automatic Double-Layer Hydraulic Rubber Vulcanizing Press Machine   Introduction The semi-automatic double-layer vulcanizing machine adopts imported hydraulic components and electrical components. Under the action of the working fluid pressure, the plunger of the vulcanizing machine rises and descends (i.e., the hot plate opens). Relying on the self-weight of the hot plate, the platform and the plunger, the working fluid flows back to the oil storage tank, achieving the purpose of descending (i.e., opening). The working fluid of the vulcanizing machine enters the cylinder through the control valve. By turning the control handle to different positions, the plunger of the flat vulcanizing machine can rise or fall. Features This series of models is equipped with automatic control devices for pressure, time and temperature. It can achieve mold closing and pressure increase, timed working cycles, and automatic pressure replenishment to ensure the quality of pressed products. The structure is compact, the appearance is beautiful, and the operation is convenient. This product is a new generation of flat vulcanizing machine. It adopts a working mode where a fast cylinder drives the plunger to automatically draw in oil. Compared with the previous flat vulcanizing machines driven by high and low pressure oil pumps, it saves energy by more than 30%. And significantly enhance work efficiency. It is the preferred product for energy conservation and environmental protection. It adopts a 7.1-inch large touch screen for operation and can preset 6 sets of mold vulcanization parameters. It is equipped with a parameter password protection function, and workers cannot change the equipment parameters at will It has an automatic locking function during vulcanization. In the vulcanization state, workers cannot open the mold at will unless a password is entered to unlock it, ensuring the vulcanization time of the product. It has the function of output memory. It can store and remember the output within a week, making the production capacity clear at a glance. It has a timed heating function and can be set to start heating at any time within 24 hours of a day. Application This product is widely used in the following industries: The semi-automatic double-layer vulcanizing machine series hydraulic press is suitable for the rolling, embossing, forming of thin metal sheets and the shallow drawing process of plastic materials. Such as the pressing of watch cases, case backs, watch straps, various gold and silver jewelry, badges, commemorative coins, glasses, and the shells of lighting fixtures, etc. The main equipment used for pressing various rubber model products and non-model products can also be used for pressing various thermosetting plastics and foamed rubber and plastic products. Technical parameters Nominal force (T) 200 Rated working pressure (MPa) 25 Spacing (mm) 150 Stroke (mm) 300 Number of oil cylinders Main cylinder1, Auxiliary cylinder2 Inner diameter of the oil cylinder (mm) 320 Number of working levels 2 Number of heating plates 3 Heating method electric Heating power (KW) 14.4 Control mode automatic Effective area of the heating plate (mm) Left & right 600 Front & back 600  

200T-350T Automatic Solicone Moulding Flat Vulcanizer Press Machine With Double Workstation

200T-350T Automatic Solicone Moulding Flat Vulcanizer Press Machine With Double Workstation   Main parameter Model 200T 250T 300T 350T Clamping force (T) 200 250 300 350 Stroke (mm) 300 300 300 300 Hot plate distance (mm) 300-430 300-430 300-430 300-430 Work platform (mm) Upper: 510*510 Lower: 560*560 Upper: 600*600 Lower: 650*650 Upper: 600*600 Lower: 650*650 Upper: 700*700 Lower: 750*750 Main cylinder diameter (mm) 360 400 450 475 Vacuum chamber travel (mm) 200 200 200 300 Motor power (KW) 9.5*2 9.5*2 9.5*2 11*2 Electrical power (KW) 16*2 18*2 18*2 21*2 Vacuum pump (KW) Double heads(200m2/h) Single  heads(100m2/h) ~ ~ ~ Weight (KG) Double head 9000 11300 13300 16500 Type of mold opening Rise/Fall - Mold entry and exit - front ejection mold opening - (Middle mold opening - ejection device) Dimensions (L*W*H, m) 3.2*2.4*2.6 3.45*2.6*2.75 3.45*2.6*2.75 4.5*2.8*2.95  

150T-400T Automatic Solid Rubber Moulding Flat Vulcanizer Press Machine

150T-400T Automatic Solid Rubber Moulding Flat Vulcanizer Press Machine Main parameter Model 150T 200T 250T 300T 350T 400T Clamping force (T) 150 200 250 300 350 400 Stroke (mm) 320 320 320 320 320 320 Work platform (mm) 500*500 560*560 600*600 650*650 750*750 850*850 Main cylinder diameter (mm) 320 360 400 450 470 500 Motor power (KW) 5.5 7.5 11 11 11 11 Type of mold opening Rise/Fall - Mold entry and exit - front ejection mold opening - (Middle mold opening - ejection device)    

110000pcs/h Automatic Rotary Tablet Compression Press Machine

110000pcs/h Automatic Rotary Tablet Compression Press Machine   Introduction ZP-29D is a new model double pressure rotary tablet press machine,and is suitable for continuously pressing powder and particle into round tablets, special-shaped tablets, double color and annular tablet.maximum press diameter 24mm, maximum pressure 100kn, maximum capacity 110,000 pcs/h, maximum press thickness 12mm,it is suitable for pressing that material that is difficult formed into tablet,meet the requirements of cGMP production.   Main Features This machine adopts double pressure, with 29 sets of mold,At the same speed,the output is twice the single pressure.Maximum press diameter 24mm, maximum capacity 110,000pcs/h, maximum press thickness 12mm. The turntable is made of nodular cast iron and strictly implemented for 12 months,which is hard, wearable,non-toxic and smooth,which fully meets the requirements of cGMP. The upper and downlink rail motion adopts the cosine curve, the turntable add damping structure, the acceleration is 0, no jump and more stable operation. The sensitivity of the hand wheel is 0.1mm, and adjust the pressure, filling volume more accurately. Lower pressure wheel shaft and the lower rail guide are installed with the casting subtraction structure (new patent), which is convenient for disassemble, maintenance and repla cement.   Technical parameters Model ZP-29D Dies No. 29 Max. Capacity (pcs/h) 110000 Max. Pressure (KN) 120 Max. Dia. Of tablet (mm) 24 Max. Depth of filling (mm) 24 Max. Thickness of tablet (mm) 12    

18000pcs/h Automatic Rotary Pill Press Machine For Double Color Tablet Making

18000pcs/h Automatic Rotary Pill Press Machine For  Double Color Tablet Making   Introduction ZP15E tablet press machine is the latest large-scale tablet press machine developed by our company. It is an automatic rotary tablet press machine that can continuously press powder and granules into tablets. The maximum tablet diameter is 50mm, and the maximum tablet thickness is 25mm. Equipped with pressure protection device. It is the first choice for mass production in pharmaceutical, chemical, electronic,food and other industries. Comply with cGMP production requirements.   Main Features Large output, high efficiency and high cost performance. The maximum tablet diameter is 50mm, the maximum tablet thickness is 25mm, the maximum pressure is 120kN, and the maximum output is 45,600 pcs/h. Equipped with a pressure overload protection device, once overloaded, it will automatically stop to avoid equipment damage. Equipped with double dust suction turntables, six suction ports up and down, good powder removal effect, and clean surface of the turntable. Oil-lubricated transmission mechanism, low noise and good lubrication effect. Stable structure. The machine is made of cast iron, which has good stability and will not be damaged after 10 years of use.   Technical parameters Model ZP-15E ZP-19E Dies No. 15 19 Max. Capacity (pcs/h) 18000 45600 Max. Pressure (KN) 120 100 Max. Dia. Of tablet (mm) 50 40 Max. Depth of filling (mm) 50 30 Max. Thickness of tablet (mm) 25 15