Steel Split Test Cell for Lithium Air Battery Research

Steel Split Test Cell for Lithium Air Battery Research EQ-STC-LI-AIR 1. The EQ-STC-LI-AIR is Split Test Cell for Lithium Air Battery Research.  2. You can control air flow pressure and test various anode and cathode material at easy.

Swagelok type cell for lithium ion battery

Dimensions of the parts 1. Stainless Steel caps (outer diameter: 25.4mm) 2. Teflon body (inner diameter: 13mm) 3. Materials: SS316 Stainless Steel   Acrylic Rack for Swagelok-Type cells Theacrylic rack is designed to work with this  swagelok-type cell, making it stand vertically  during test.  Two types of racks are available: · T5: Holds 5 cells. Dimension: 500 x 70 * 90 mm · T8: Holds 8 cells. Dimension: 800 x 70 * 90 mm

Cylindrical Cell 18650 Split Type Test Cell for 18650 Batteries Research

EQ-SC-18650 Split Type Test Cell is designed for testing 18650 batteries. Its detachable design allows you to test the cycling behavior as well as structural changes of electrodes easily and quickly.

15 mm Diameter Three-Electrode Split Test Cell for R&D Coin Cell

15 mm Diameter Three-Electrode Split Test Cell for R&D Coin Cell 1. The EQ-3ESTC split-able test cell is designed for R&D of rechargeable battery materials by testing three electrodes. 2. It is designed to test various electrodes easily and quickly by providing the user a structure to simulate assembled coin cells without the need to crimp actual coin cell cases. 3. Two sides of the test cell connect to both electrode (the anode and cathode), with the middle being connected to the reference electrode which can be used for monitoring voltage variations of the two electrodes. 4. This test cell can accept 15 mm diameter electrodes and 24mm separators.

Stainless Steel Two-Electrode Split Test Cell for Coin Cell R&D

TEST Cell is designed for R&D of rechargeable battery material. It can accept optional 10,12, 15, 19, 20, 24 mm diameter electrode and separator (please kindly choose the size from above check box) and test electrode easy and quick.

Quartz Split Test Cell for 26650 Cylindrical Cell

EQ-SC-26650 Split Type Testing Cell is designed for testing 26650 batteries. Its detachable design allows you to test the cycling behavior as well as structural changes of electrode easily and quickly.

Coin Cell Three-Electrode Split Test Cell with Pressure Gauge

Coin Cell Three-Electrode Split Test Cell with Pressure Gauge TMAX-Three-Electrode is a three-electrode split cell to test anode/cathode with reference electrode in between. It has a mechanical pressure gauge to monitor the air pressure inside chemical reaction chamber and a 1/8'' barb inlet/outlet with needle valve for gas easy in/out.   Specifications Model TMAX-Three-Electrode Features 1) Full stainless steel structure ( SS304) 2) Silicon O-ring in between the three plates to ensure good sealing and work up to 250 °C 3) Spring load on top to accept various thickness electrode 4) Easy to separate cell after test 5) Small enough to be put in and out from glove box 6) Mechanical Pressure Gauge: 1/4NPS Fitting (call for price and delivery time if need digital pressure gauge) 7) Niddle valve with 1/4" pipe adaptor Specifications Diameter insert:24 mm Pressure Range: -0.1Mpa-0.5Mpa (0 Mpa as atmosphere)                             

Coin Cell Split Test Cell Tester for In-situ XRD Analysis of Electrode Materials of Rechargeable Battery

Coin Cell Split Test Cell Tester for In-situ XRD Analysis of Electrode Materials of Rechargeable Battery