Lab Automatic 300mm Tape Casting Coater Film Coating Machine

Automatic Film Coater with Dryer, Vacuum Chuck & Adjustable Film Applicator compact tape casting coater 1.coater width:10-200mm  2.with Dryer,Vacuum Pump 3.for lab equipment

Lab Electrode Coater with Vacuum Chuck & 100-250mm Doctor Blade

Automatic Film Coater with Dryer, Vacuum Chuck & Adjustable Film Applicator compact tape casting coater 1.coater width:10-200mm  2.with Dryer,Vacuum Pump 3.for lab equipment

Lab Multi-parameter Automatic Programmable Control Single Station Dip Coater with 4.3-inch LCD Touch Screen

Nanometer Range Programmable Dip Coater with Drying Oven (1-500 nm/sec, 100°C Max. )

Lab Table Type Two Channels Injection Pump used with Spin Coater

II automatic film coater is a Large Automatic Film Coater designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has an unique driving system to produce smooth coating on all types of materials. One micrometer adjustable applicator is included for immediate use. 

Customizable Anilox Roller Coating Machine

Customizable Anilox Roller Coating Machine Anilox roller coating machine is using an anilox roller to transfer the coating solution onto the substrate. The surface of the anilox roller has many tiny cells that can precisely control the amount of coating solution, achieving a high-precision and uniform coating. The coating width and oven length can be customized. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  Anilox roller Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Oven insulation  asbestos insulation layer Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-30 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

Laboratory Precision Desktop Dip Coating machine

Nanometer Range Programmable Dip Coater with Drying Oven (1-500 nm/sec, 100°C Max. )

Lab 3 Heads 1 Inch RF Plasma Magnetron Sputtering Coater Machine with DC Magnetron Sputtering

3 Heads Compact 1 Inch RF Plasma Magnetron Sputtering Coater, with DC Magnetron Sputtering Option

5 Heads RF Plasma Magnetron Sputtering Coater Machine for MGI Thin Film Research

Customized 5 Heads RF Plasma Magnetron Sputtering Coater for MGI Thin Film Research

Combinatorial Plasma Sputtering Coater Machine with Three 2'' magnetron Sputtering Sources and RF/DC Power

Combinatorial Plasma Sputtering Coater with Three 2'' magnetron Sputtering Sources and RF/DC Power Supplies

Lab DC/RF Dual-Head Vacuum 2 Inch Magnetron Plasma Sputtering Coater Machine

DC/RF Dual-Head High Vacuum 2 Inch Magnetron Plasma Sputtering Coater

Continuous Roll To Roll Coating Machine for Lithium Battery Electrode Making with Optional Length Oven

1. TMAX-JS is compact Hot Rolling Cylinder Press with max. working temperature of 150°C, which is designed for preparing battery electrode for both inside or outside glove-box.  High torgue DC moter is Ar gas compatible.   It serves well in the application such as increasing active material density of the electrode in Li-ion batteries research after coating. It has a pair of steel rollers with a heating capacity of 150°C max. 2. TMAX-JS is equipped with 24V DC motor for a safe operation under Ar gas environment.

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Customizable Extrusion Coater Slot Die Coating Machine

Customizable Extrusion Coater Slot Die Coating Machine The extrusion coating machine is a device that uses a narrow extrusion coating die to non-contact coating the substrate. This equipment can achieve two types of coating functions: continuous coating and stripe coating through the combination of slot die narrow extrusion coating die, precision metering feeding system, and feeding valve. The equipment has high coating accuracy, good consistency and stability, and is widely used in the lithium commercial battery, FCCL, optical film, high adhesive tape, and various functional film industries. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  Slot die Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Oven insulation  asbestos insulation layer Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-30 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

PLC Controlled Dip Coater (1-200 mm/min) for Large Substrate up to 10"x12"

PLC Controlled Dip Coater (1-200 mm/min) for Large Substrate up to 10"x12"