PLC Controlled Dip Coater (1-200 mm/min) for Large Substrate up to 10"x12"

PLC Controlled Dip Coater (1-200 mm/min) for Large Substrate up to 10"x12"

Large size 5-position programmable dip coater w/ 225L Dry Oven

Large size 5-position programmable dip coater w/ 225L Dry Oven

Laboratory Doctor Blade Film Coater Coating Machine with Heat and Vacuum Function

Compact Tape Casting Coater with Vacuum Chuck, Adjustable Film Applicator & Dryer Cover TMAX-TMH250 is a CE Certified ready compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 100 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 100°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.

Customizable Immersion Double-Sided Dip Coating Machine Extrusion Coater

Customizable Immersion Double-Sided Dip Coating Machine Extrusion Coater This coating machine is suitable for substrates that require double-sided dip coating. Suitable for slurries with lower viscosity. The coating width, oven length, and temperature can be customized. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  double-sided dip coating Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-20 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  Tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

Nanometer Range Programmable Dip Coater with Drying Oven (1-500 nm/sec, 100°C Max. )

Nanometer Range Programmable Dip Coater with Drying Oven (1-500 nm/sec, 100°C Max. )

5-Position Programmable Dip Coater with Speed 1-200 mm/min & Heating Chamber 100°C max.

5-Position Programmable Dip Coater with Speed 1-200 mm/min & Heating Chamber 100°C max.

Desktop Dip Coater with variable Speed (1-200 mm/min)

Desktop Dip Coater with variable Speed (1-200 mm/min)

Lab Compact Wire Bar Coater Coating Machine with 300mm Width

Lab Compact Film Vacuum Coating Machine with 300mm Width Doctor Blade

Graphene Coating Machine Graphene Heat Conduction Film Coater with Return Oven

Graphene Coating Machine Graphene Heat Conduction Film Coater with Return Oven It is applicable to the precise coating production of high thermal conductivity graphene heat conduction film and graphene heat conduction film in the fields of smart phones, tablet computers, smart VR, planetary circuits, electrothermal painting, floor heating film, etc. The coating machine has better price and higher production efficiency   Specification Control system Independent research and development system Uniform coating ＜5% Coating width Effective coating width100-380mm Coating thickness 0.005-3MM（wet film） Coating typoe Doctor blade Tension control Automatic tension adjustment (according to the membrane tension required to adjust) Oven length 10meters(Back to type) Dryingoven temp Normal temperature ~120 degrees (can be segmented constant temperature) Heating method Electrical heating Oven wind force Adjustable Deviation correcting device Automatic rectifying of winding Exhaust air system Suction is adjustable Production speed 1-20 m/min Equipment air pressure 6 KG/cm2 Power supply 380V 50Hz Equipment power 10KW Dimension 2700*1300*1800mm    

Lab High Temperature Desktop Slot Die Coater Machine of Adjustable Coating Width Used in Perovskite Films

Sales Manager: Gia Email: Gia@tmaxlaboratory.com Wechat: Dingqiuna Whatsapp：+86 131 7450 6016 Skype: gia@tmaxcn.com

Touch Screen Programmable (1-200 mm/min) Dip Coater with Drying Oven up to 100°C

Touch Screen Programmable (1-200 mm/min) Dip Coater with Drying Oven up to 100°C 

Programmable Vacuum Chuck Spin Coater (500-6000 rpm, 8" wafer Max) with Optional Heating Cover

Programmable Vacuum Chuck Spin Coater (500-6000 rpm, 8" wafer Max) with Optional Heating Cover

Compact Spin Coater ( Max. 8000 rpm, 4" wafer Max.) with 3 Sets of Vacuum Chucks & Complete Accessories

Compact Spin Coater ( Max. 8000 rpm, 4" wafer Max.) with 3 Sets of Vacuum Chucks & Complete Accessories

Laboratory Electric Heat Film Coating Machine for Electrode Coater with Dryer

Compact Tape Casting Coater with Vacuum Chuck, Adjustable Film Applicator & Dryer Cover TMAX-TMH250 is a CE Certified ready compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 100 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 100°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.