Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Customizable Extrusion Coater Slot Die Coating Machine

Customizable Extrusion Coater Slot Die Coating Machine The extrusion coating machine is a device that uses a narrow extrusion coating die to non-contact coating the substrate. This equipment can achieve two types of coating functions: continuous coating and stripe coating through the combination of slot die narrow extrusion coating die, precision metering feeding system, and feeding valve. The equipment has high coating accuracy, good consistency and stability, and is widely used in the lithium commercial battery, FCCL, optical film, high adhesive tape, and various functional film industries. Specification Control system  independently developed Coating width  200mm-1500mm Coating method  Slot die Coating thickness  0.005-5MM (uniformity ± 3%) Thickness adjustment  digital micrometer Heating channel  drying channel 2-20 meters (1 meter per section) (customizable) Heating control  thermocouple sensor Tension control  Adjustable tension Deviation correction device  fully automatic deviation correction for feeding/receiving Drying duct fan  adjustable speed Oven insulation  asbestos insulation layer Collecting and discharging diameter  Collecting and discharging material diameter 300mm (customizable) Rear lamination  finished lamination (steel pipe+rubber hose) Wind speed control  with wind filtering at the outlet of the drying tunnel (uniform wind speed) Coating speed  1-30 meters/minute (adjustable according to the drying condition of the adhesive) Drying passage roller  304 stainless steel Drying channel material  304 stainless steel (box) Heating method  stainless steel heating tube Oven temperature  room temperature -160 degrees (can be kept at a constant temperature) Drying track structure  tiled Waste heat recovery  with automatic waste heat collector Glue supply method  pressure bucket Expansion axis  3-inch gas expansion axis Drying channel lifting  cylinder lifting Exhaust system  centrifugal fan (external interface 100MM) Equipment power supply  380V Control AC24V Equipment power  12KW (peak)    

PLC Controlled Dip Coater (1-200 mm/min) for Large Substrate up to 10"x12"

PLC Controlled Dip Coater (1-200 mm/min) for Large Substrate up to 10"x12"

Large size 5-position programmable dip coater w/ 225L Dry Oven

Large size 5-position programmable dip coater w/ 225L Dry Oven

Millimeter Large Size Dip Coating Machine Coater With Low Price

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Vacuum Programmable Dip Coater Supplier Manufacturer

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

4-Position Angle Adjustable Dip Coater Machine

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Nano-Level Constant Temperature Dip Coater With Oven

Nanometer Range Programmable Dip Coater with Drying Oven (1-500 nm/sec, 100°C Max. )

1000C High-Temperature Heated Dip Coating Unit Coater

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Benchtop Dip Coating System Coater With Infrared Heating

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

PLC Programmable Vertical Larger Dip Coater With Film Deposition On Substrate

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

6-Position Programmable PLC Dip Coating System Coater With Stirrer & Heater For Metal Process

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Benchtop 4-Station Multi-Layer Heating Dip Coating Process Coater

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

5-Station Multiple Dip Coating Unit Equipment Coater With Constant Temperature

Dip Coater (1-200 mm/min) with 124 L Temperature Chamber and Touch Panel Controller for Large Substrate up to 16"x 9"

Laboratory Doctor Blade Film Coater Coating Machine with Heat and Vacuum Function

Compact Tape Casting Coater with Vacuum Chuck, Adjustable Film Applicator & Dryer Cover TMAX-TMH250 is a CE Certified ready compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, which is particularly useful when making thin coatings. One 100 mm width adjustable micrometer applicator (doctor-blade). Heating cover with digital temperature controller can dry films after coating up to 100°C with a temperature accuracy of +/-1°C. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.